Modern, environmentally friendly energy concepts are based on distributed renewable energy and local production sites as energy suppliers. In addition, smart houses with various renewable energy installations and bidirectional vehicles are becoming important contributors to modern power grids. Due to fluctuations in energy supply and demand, these grids must be very flexible and require intelligent subsystems for energy distribution and storage.

Whether you are developing any kind of grid-connected inverter, vehicle-to-grid (V2G) systems, wind, solar, or battery control systems (primary control), microgrid management systems (secondary control), or tertiary control systems interfacing the main power grid, we offer comprehensive support in designing, prototyping, implementing, and testing your systems.

Microgrids for Mobile Applications

Aircraft, ships, and trains host a range of generators, storage systems, and energy consumers. Their onboard power systems include various hardware and software for control and communication. You can rely on our full support when developing and testing these mobile microgrids.

Smart grids include various subsystems for energy generation, storage, transmission, and consumption. A central control unit monitors the overall energy system to balance power fluctuations and match energy supply and consumption. This increases efficiency, saves resources, reduces emissions, and ensures an adequate energy supply at all times.


A new, highly flexible distribution infrastructure and smart control units are needed to make our power grids ready for the future. New devices such as solid-state transformers, controllable local grid transformers, and stationary batteries can help ensure a stable energy supply, but they also have to be controlled. Therefore, all system components for power generation, consumption, and storage must be connected to a central control unit (SCADA system). This will help meet the various challenges our power grids are facing:

  • Fluctuations in energy generation throughout the day
  • Distributed power generation and its combination with existing power grids
  • Conversion of direct current (DC), usually generated by solar and battery systems, to alternating current (AC)
  • Smart houses that can be energy consumers and providers at the same time

dSPACE Solutions for Power Grids

dSPACE offers a wide range of products for developing and testing smart grid controllers. Our portfolio covers all required test cases, both for signal-level and power-level testing.

For hardware-in-the-loop controller testing and real-time simulations, our SCALEXIO systems are ideal to fully test various renewable-energy inverters, V2G systems, and any system for primary, secondary, and tertiary control. All parts of the power grid can be simulated on the basis of your requirements. For this, you can use our Electrical Power Systems Simulation (EPSS) Package in combination with Simscape Electrical™ and our broad portfolio of ready-to-use motor and power electronics libraries.

For power-level testing, our simulation environment can be easily combined with power grid emulators, such as our power HIL systems, to test the complete functionality at full power.

  • Powerful prototyping systems for any kind of control system
  • Ready-to-use models for environment, motor, and power electronics
  • Topology-based power grid and power electronics simulation

Simulation Modeling

Mathematical real-time models

Mathematical real-time models

Use simulation modeling to create a digital twin of a physical system to predict its behavior in the real world under all circumstances.

More about Simulation Modeling

Rapid Prototyping

Function development from autonomous driving to zero emissions

Function development from autonomous driving to zero emissions

Our scalable and comprehensive dSPACE prototyping systems help to bring your ideas to life in mechatronic control design and data-driven development.

More about Rapid Prototyping

Production Software Development

Optimized Production Software Development

Optimized Production Software Development

The central challenges in production software development include the optimization of RAM resources, run time, and integration into the overall system. Furthermore, it must be possible to split the software in such a way that regular software updates are possible. And before the final software release, special validation and often a release process are required.

More about Production Software Development

SIL Testing

Software-in-the loop (SIL) testing with the powerful dSPACE solution for PC- and cloud-based simulation

Software-in-the loop (SIL) testing with the powerful dSPACE solution for PC- and cloud-based simulation

With the dSPACE solution for software-in-the loop (SIL) testing, you can significantly accelerate your software development process by testing and validating virtually. dSPACE offers you a complete, modular, scalable development and test solution. You can conveniently simulate a device-under-test on a PC, connect it to physics-based models, run scalable tests in the cloud, and then easily reuse test scripts on hardware-in-the-loop (HIL) systems.

More about SIL Testing

HIL Testing

Central Test Method for Validating ECUs

Central Test Method for Validating ECUs

The dSPACE HIL test systems provide a simulated environment for efficient and reproducible validation of real ECUs in the laboratory 24/7. This increases test coverage and shortens validation times significantly. Our HIL solutions cover all vehicle domains from autonomous driving to zero emissions – starting with component testing and up to virtual vehicle testing.

More about HIL Testing

Power HIL Testing

Closing the Gap Between HIL and Dynamometer Testing

Closing the Gap Between HIL and Dynamometer Testing

With our power HIL systems, we offer ready-to-use solutions for testing any kind of inverter, including the controller and power electronics, at full power. Using real voltages and currents, our systems enable you to complete exceptionally rigorous tests. Our systems behave like a digital twin of the real system and allow for easy configuration with just a few clicks, which significantly reduces setup times.

More about Power HIL Testing

Bus & Network Communication

Simulation, Logging, Replay, and Analysis

Simulation, Logging, Replay, and Analysis

dSPACE provides a comprehensive and complete tool chain for simulation, analyzation, and validation, supporting a wide range of bus systems and applications. Ready-to-use products and customer-specific solutions support you during your development process.

For data exchange with any industrial devices and SCADA systems using protocols like Modbus, Distributed Network Protocol 3 (DNP3), and IEC 61850, please contact us.

More about Bus & Network Communication

Test Data Management

Data Management and Collaboration Software for Automated ECU Testing

Data Management and Collaboration Software for Automated ECU Testing

SYNECT, our solution for the efficient and automated verification and validation of ECU software, helps engineers worldwide handle all test parameters, their dependencies, versions and variants, and the underlying requirements throughout the entire development process.

This results in consistent data versions and complete traceability as required in homologation processes, and an efficient reuse of data in other projects.

More about Test Data Management

This sounds interesting. Get in touch:

Consulting & Engineering Services

Development support from start to finish

Development support from start to finish

Developing complex E/E systems and software with ever more safety-critical functions, especially in the area of autonomous systems, raises the question of guaranteeing function reliability. That's why dSPACE offers end-to-end expertise in functional safety, test strategy development as well as verification and validation in complex E/E processes - to support you from the earliest project stages to homologation.

dSPACE systems are easy to get up and running – however, if a project is more complex, if individual solutions are needed or if there is high time pressure, you can also trust dSPACE's fast, competent and reliable engineering services.

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.