In the future, we will continue to offer on-site trainings in Germany as well as virtual classroom trainings.
You can participate in these trainings from your office, whether at your company or in your home. Similar to on-site trainings, there will be live presentations (no videos) and practical exercises. You will also be able to ask questions and provide feedback. The virtual classroom training will use the WebEx training center and run in a browser plug-in. For audio transmission, you will need a headset, or a microphone and speakers. You can also use a camera if you like, and a second computer screen will be useful. The WebEx training center lets you complete the practical exercises remotely on our computers, which means you do not have to install any additional software on your own computer.
As it is difficult to stay focused during a full day of a virtual classroom training, we split each training day into two parts, to be held on consecutive days. To ensure optimum support during the practical exercises, the number of participants is limited to ten, and two trainers will be available for most trainings. Information on hygiene measures during classroom training can be found at the bottom of the page.
If the spread of coronavirus requires specific hygiene measures during on-site trainings, we will adhere to our hygiene measures, which you can find below.
To get you under way quickly we regularly hold training sessions. Even customer-specific training and on-site training are possible.
|Introduction to the AUTOSAR Classic Platform||This course introduces you to the main goals and contents of the AUTOSAR Classic Platform.|
|Introduction to the AUTOSAR Adaptive Platform||This course introduces you to the main goals and contents of the AUTOSAR Adaptive Platform and compares them with their counterparts on the AUTOSAR Classic Platform|
|System Modeling with SystemDesk||
This training course focuses on modeling according to the AUTOSAR Classic Platform.
Using virtual ECUs and PC-based simulation for early validation of ECU software
|dSPACE Real-Time Systems (MicroAutoBox II, MicroLabBox)||Single-processor systems in detail|
|dSPACE Real-Time Systems (SCALEXIO Platforms, MicroAutoBox III)||Learn how to use SCALEXIO for rapid control prototyping|
|dSPACE SCALEXIO HIL System||
Introduction to SCALEXIO for hardware-in-the-loop simulation
|ControlDesk Basic||Introduction to ControlDesk instrumentation and management features|
|ControlDesk Advanced||Features such as ControlDesk Automation and the Bus Navigator|
|Workshop: ControlDesk Automation||With scripts, you can perform your complex workflows in no time, such as creating a project and experiment with your custom settings.|
|ConfigurationDesk Basic (for SCALEXIO Platforms and MicroAutoBox III)||This training course introduces you to the basic workflow for simulation systems based on SCALEXIO technology using dSPACE ConfigurationDesk and model ports.|
|RTMaps Basic||Introduction to RTMaps|
|RTMaps Advanced||Integration of your own algorithms and using embedded devices|
|RapidPro||Introduction to the RapidPro System|
|TargetLink Basic||TargetLink in detail|
|TargetLink Advanced||More TargetLink features|
|TargetLink AUTOSAR Support||Using the TargetLink AUTOSAR Blockset|
|AutomationDesk||Test automation and test management based on AutomationDesk|
|Real-Time Testing||Introduction to programming real-time tests based on the Python programming language|
|dSPACE Automotive Simulation Models|
|ASM Vehicle Dynamics Basic||For real-time simulation of vehicle dynamics behavior in an environment|
|ASM Traffic||The ASM Traffic Simulation Package is an add-on for the ASM Vehicle Dynamics Simulation Package.|
You will learn about the concept and the structure of ASM vehicle powertrain simulation models.
|Building on the contents of the ASM Powertrain course, this course will address your specific questions regarding the modeling of internal combustion engines with ASM.|
|ASM Battery||Concept and the structure of the ASM Battery model|
|Physics-Based Sensor Simulation||The main focus of this training course is to cover the complete sensor simulation tool chain|
|AURELION –Sensor-Realistic Simulation||
Introduction to AURELION
|FPGA Basic||dSPACE provides various real-time components with freely programmable FPGAs|
|FPGA Electric Drives||The training course will equip you with all the skills you need for working with the dSPACE XSG Electric Components Library|
|RTI CAN MultiMessage Blockset||Handling complex CAN setups in hardware-in-the-loop applications|
|Bus Manager Basic (for SCALEXIO, MicroAutoBox III, and VEOS Platforms)||Central tool for configuring LIN, CAN, and CAN FD communication for the SCALEXIO and MicroAutoBox III real-time systems and PC-based VEOS simulation systems|
|Bus Manager Advanced (SCALEXIO, MicroAutoBox III, VEOS)||Advanced Bus Manager features such as tool automation projects|
|dSPACE FlexRay Configuration Package||Simulation of one or more nodes in FlexRay networks|
|SYNECT Test Management||Processing test data with SYNECT Test Management, including all the steps from handling requirements, test cases and execution plans to executing tests and evaluating the test results|
|Workflow Management||This training course covers the entire tool chain for variant-based workflow management (VBWM), from configuring to executing automated processes.|
Please note that we will charge you EUR 25.00 if you cancel your registration up to 14 days before the training course begins. If you cancel within 5-13 days prior to the training course, we will charge you 50% of the training fee. Last-minute cancellations, received within 1-4 days before the scheduled course date, and no-shows will result in full forfeiture of the course fee. Registrants unable to attend may send a substitute without paying any additional fee. Please inform us of the substitution as soon as possible.
In the event of unforeseen circumstances, including but not limited to inclement weather, trainer unavailability, lack of participation, etc., dSPACE may choose to reschedule or cancel a particular training course. In the case of cancellation, notification will be issued at least 5 days prior to the course start date. Should this occur, registered participants will be entitled to reschedule their training to another course date or receive a full refund of paid course fees.
Subscribe to our newsletters, or manage or delete your subscriptions