Patches for DS1005 Vs. 12 and MicroAutoBox DS1401 Vs. 18

Using DS1005 and DS1401 MicroAutoBox with New Flash Memory Components

As of processor board revision number

  • DS1005-12 and
  • DS1401-18

the DS1005 and the DS1401 (MicroAutoBox) are equipped with new flash memory components.

If you use these boards in conjunction with a dSPACE Release lower than Release 5.3, you need some relevant patches and you have to recompile your existing real-time programs, or models.

Patches are available for dSPACE Releases (RCP and HIL Software) 4.2, 5.0, 5.1, and 5.2, as well as for CalDesk 1.3, and 1.4.

For building the real-time application, an Implementation patch is required. Additionally ControlDesk or CalDesk patches must be installed, depending on the actually used Experiment software.

To ensure proper operation, it is mandatory to install always the Implementation patch and the ControlDesk or CalDesk patch.

This list shows those patches that introduced the support of the new hardware versions. Newer patches also contain the related changes, of course.

Release Implementation (RTI, RTLib) ControlDesk CalDesk Remark
Release 5.2 Integrated in Release 5.2p1 Release 5.2p1 CalDesk 1.4p1 Since Release 5.2 CalDesk is contained on the same DVD as the RCP and HIL Software.
Release 5.1 MABX_DS1005_42-51_Patch.exe
ControlDesk 2.8p1    
Release 5.0 ControlDesk 2.7p6    
Release 4.2 ControlDesk 2.6p11    
CalDesk 1.3     CalDesk 1.3p2 For the possible combinations of CalDesk with RCP and HIL Software please refer to Combination of dSPACE products.

The affected DS1005 boards and MicroAutoBoxes are shipped with the following additional information




Related Topics
Date 2007-11-20
产品类型 紧凑型系统
硬件类型 现成的系统
产品 MicroAutoBox, RCP and HIL 软件
资料信息 补丁
信息类别 故障排除
dSPACE 版本发布 2013-A之前版本


订阅/管理订阅/取消订阅 dSPACE新闻简讯