Patches for DS1005 Vs. 12 and MicroAutoBox DS1401 Vs. 18

Using DS1005 and DS1401 MicroAutoBox with New Flash Memory Components

As of processor board revision number

  • DS1005-12 and
  • DS1401-18

the DS1005 and the DS1401 (MicroAutoBox) are equipped with new flash memory components.

If you use these boards in conjunction with a dSPACE Release lower than Release 5.3, you need some relevant patches and you have to recompile your existing real-time programs, or models.

Patches are available for dSPACE Releases (RCP and HIL Software) 4.2, 5.0, 5.1, and 5.2, as well as for CalDesk 1.3, and 1.4.

For building the real-time application, an Implementation patch is required. Additionally ControlDesk or CalDesk patches must be installed, depending on the actually used Experiment software.

To ensure proper operation, it is mandatory to install always the Implementation patch and the ControlDesk or CalDesk patch.

This list shows those patches that introduced the support of the new hardware versions. Newer patches also contain the related changes, of course.
 

Release Implementation (RTI, RTLib) ControlDesk CalDesk Remark
Release 5.2 Integrated in Release 5.2p1 Release 5.2p1 CalDesk 1.4p1 Since Release 5.2 CalDesk is contained on the same DVD as the RCP and HIL Software.
Release 5.1 MABX_DS1005_42-51_Patch.exe
(10MB)
 
ControlDesk 2.8p1    
Release 5.0 ControlDesk 2.7p6    
Release 4.2 ControlDesk 2.6p11    
CalDesk 1.3     CalDesk 1.3p2 For the possible combinations of CalDesk with RCP and HIL Software please refer to Combination of dSPACE products.


The affected DS1005 boards and MicroAutoBoxes are shipped with the following additional information

 

DS1005_New_Flash.pdf
MABX_New_Flash.pdf

 

Verwandte Themen
Tags
Date 2007-11-20
Produkttyp Kompakte Systeme
Hardware-Typ Standardsysteme
Produkt MicroAutoBox, RCP- und HIL-Software
Informationstyp Patches
Informationskategorie Problembehandlung
dSPACE Release Bis 2013-A

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.