As of processor board revision number
the DS1005 and the DS1401 (MicroAutoBox) are equipped with new flash memory components.
If you use these boards in conjunction with a dSPACE Release lower than Release 5.3, you need some relevant patches and you have to recompile your existing real-time programs, or models.
Patches are available for dSPACE Releases (RCP and HIL Software) 4.2, 5.0, 5.1, and 5.2, as well as for CalDesk 1.3, and 1.4.
For building the real-time application, an Implementation patch is required. Additionally ControlDesk or CalDesk patches must be installed, depending on the actually used Experiment software.
To ensure proper operation, it is mandatory to install always the Implementation patch and the ControlDesk or CalDesk patch.
This list shows those patches that introduced the support of the new hardware versions. Newer patches also contain the related changes, of course.
Release | Implementation (RTI, RTLib) | ControlDesk | CalDesk | Remark |
Release 5.2 | Integrated in Release 5.2p1 | Release 5.2p1 | CalDesk 1.4p1 | Since Release 5.2 CalDesk is contained on the same DVD as the RCP and HIL Software. |
Release 5.1 | MABX_DS1005_42-51_Patch.exe (10MB) |
ControlDesk 2.8p1 | ||
Release 5.0 | ControlDesk 2.7p6 | |||
Release 4.2 | ControlDesk 2.6p11 | |||
CalDesk 1.3 | CalDesk 1.3p2 | For the possible combinations of CalDesk with RCP and HIL Software please refer to Combination of dSPACE products. |
The affected DS1005 boards and MicroAutoBoxes are shipped with the following additional information
DS1005_New_Flash.pdf
MABX_New_Flash.pdf
Date | 2007-11-20 |
제품 타입 | Compact Systems |
하드웨어 타입 | Off-the-Shelf Systems |
제품군 | MicroAutoBox, RCP and HIL Software |
인포메이션 타입 | 패치 |
인포메이션 카테고리 | Troubleshooting |
dSPACE Release | Prior to 2013-A |
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.