As of processor board revision number
the DS1005 and the DS1401 (MicroAutoBox) are equipped with new flash memory components.
If you use these boards in conjunction with a dSPACE Release lower than Release 5.3, you need some relevant patches and you have to recompile your existing real-time programs, or models.
Patches are available for dSPACE Releases (RCP and HIL Software) 4.2, 5.0, 5.1, and 5.2, as well as for CalDesk® 1.3, and 1.4.
For building the real-time application, an Implementation patch is required. Additionally ControlDesk® or CalDesk patches must be installed, depending on the actually used Experiment software.
To ensure proper operation, it is mandatory to install always the Implementation patch and the ControlDesk or CalDesk patch.
This list shows those patches that introduced the support of the new hardware versions. Newer patches also contain the related changes, of course.
|Release||Implementation (RTI, RTLib)||ControlDesk||CalDesk||Remark|
|Release 5.2||Integrated in Release 5.2p1||Release 5.2p1||CalDesk 1.4p1||Since Release 5.2 CalDesk is contained on the same DVD as the RCP and HIL Software.|
|Release 5.0||ControlDesk 2.7p6|
|Release 4.2||ControlDesk 2.6p11|
|CalDesk 1.3||CalDesk 1.3p2||For the possible combinations of CalDesk with RCP and HIL Software please refer to Combination of dSPACE products.|
The affected DS1005 boards and MicroAutoBoxes are shipped with the following additional information