The DS2642 is used in SCALEXIO hardware-in-the-loop simulators. It provides a central Failure Insertion Unit and power switches for HIL tests of ECUs.
The DS2642 FIU & Power Switch Board combines two components:
The DS2642 offers 10 switchable software-configurable channels, that can be bundled for increasing the current possible.
The central FIU on the DS2642 is connected to the failure routing units of the I/O boards via the failrails. It switches the failures for the channels on the boards.
The following options are available:
The failures are prepared on the I/O boards by relays, and failure insertion is performed by semiconductor switches on the central FIU. The result is a fast switching frequency that enables loose contacts to be simulated.
The power switch provides 10 switchable channels, which supply current to the external devices such as ECUs and loads. The current can be measured simultaneously. The central FIU can also use the power switch channels to simulate short circuits to the supply to the ECU. The channels can be bundled to increase the current and are selected in ConfigurationDesk. Several DS2642s can be used in one SCALEXIO system.
The power consumption of the connected components can be measured precisely on each power switch channel.
Parameter | Specification |
---|---|
Power switches (Power Switch 1) |
|
Failure Insertion Unit |
|
Internal communication interface |
|
Physical size |
|
Voltage supply |
|
Typical power consumption |
|
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.