For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

DS6101 Multi-I/O Board

SCALEXIO I/O board with signal conditioning for automotive systems

The DS6101 provides a large variety of I/O functions and can be used to generate and measure typical automotive signals. This makes the DS6101 ideal for applications with extensive I/O requirements.

Application Areas

The DS6101 comprises a large variety of I/O functions needed for hardware-in-the-loop simulation and can be used for generating and measuring typical automotive signals. This makes the DS6101 ideally suited for applications with extensive I/O requirements. For failure simulation, you can connect additional hardware to your system. The same holds true for bus communication. There you can use the DS2671 Bus Board  or the DS6301 CAN/LIN Board.

Key Benefits

The DS6101 Multi I/O board offers 69 I/O channels for voltage-related functions, including analog, digital, resistance, and special input/output groups, for example for lambda probe simulation. The integrated signal conditioning is tailored to automotive project requirements, such as voltages of 12 V, 24 V, and 48 V.

I/O Functionality

The DS6101 provides 33 I/O functions that are supported by different I/O channels. They are defined and configured graphically with dSPACE ConfigurationDesk.

Analog In

  • Voltage In
  • Voltage Signal Capture


Digital In

  • Multi Bit In
  • Trigger In
  • PWM/PFM In
  • Digital Pulse Capture
  • SENT In


Analog Out

  • Voltage Out
  • Current Sink
  • Wavetable Voltage Out
  • Wavetable Current Sink
  • Waveform Voltage Out
  • Waveform Current Sink
  • Angular Wavetable Voltage Out


Digital Out

  • Multi Bit Out
  • PWM/PFM Out
  • Digital Pulse Out
  • Wavetable Digital Out
  • Waveform Digital out
  • Angular Wavetable Digital Out
  • SENT Out


Engine Simulation

  • Injection/Ignition Voltage In
  • Crank/Cam Voltage Out
  • Crank/Cam Current Sink
  • Crank/Cam Digital Out
  • Knock Signal Out
  • Lambda DCR
  • Lambda NCCR


Resistor Simulation

  • Resistance Out
  • Potentiometer Out


Further Sensor Simulation

  • Digital Incremental Encoder Out
  • Wheel Speed Out

Parameter Specification
General
  • 69 software-configurable I/O channels
  • 3 x 50-pin Sub-D connectors
Signal measurement
  • 10 analog inputs (Analog In 4)
    • Voltage measurement range 0 ... 60 V
    • Resolution 16 bit
  • 12 digital inputs (Digital In 3)
    • Voltage measurement range 0 ... 60 V
  • 10 variable inputs (Flexible In 3)
    • Voltage measurement digital
      • Voltage range -10 ... 10 V
      • Fast threshold adaptation (useful for ignition/injection signal measurement)
    • Voltage measurement analog
      • Voltage range -10 ... 10 V
      • Resolution 16 bit
Signal generation

 

  • 8 analog outputs (DC) (Analog Out 6)
    • Only voltage generation
    • Output voltage 0 ... 10 V
    • Output current -5 ... +5 mA
    • Resolution 14 bit
  • 4 analog outputs (DC) (Analog Out 9)
    • Output voltage 0 ... 10 V
    • Output current -5 ... +5 mA
    • Resolution 14 bit
    • Current sink: Current range -30 ... +30 mA
  • 3 analog outputs (AC) (Analog Out 8)
    • Only voltage generation
    • Output voltage -20 ... +20 V
    • Resolution 14 bit
  • 6 resistance simulation channels (Resistance Out 2)
    • Effective inner resistance range 16 Ω ... 1 MΩ
    • Voltage range -3 ... +18 V to GND
    • Current range -80 ... +80 mA
    • Power max. 250 mW
  • 14 digital outputs (Digital Out 3)
    • Configurable as low-side/high-side switch or push/pull
    • Low-side = GND
    • High-side Dig-Out-Ref 1 or 2
    • Voltage range high-side: 5 ... 60 V
    • Current range 0 ... ±150 mA
    • 150 mA per channel and 1 A in sum per group
Special I/O channels
  • 1 analog input and output group, e.g., for lambda probe simulation (Analog In 4, Analog Out 7)
    • 1 ADC, 12 bit
    • 1 DAC, 14 bit
    • Voltage range -10 ... +10 V
    • Current range -5 ... +5 mA
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 3 slots
Voltage supply
  • 24 V
Typical power consumption
  • 14.4 W

Contact Information