For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

DS6301 CAN/LIN Board

By supporting CAN and LIN networks on one board, the DS6301 is tailored to typical applications for automotive projects.  

Application Areas

The DS6301 CAN/LIN Board is the interface between a dSPACE SCALEXIO system and CAN, CAN FD and LIN bus systems. It has eight channels, four of which are dedicated for CAN/CAN FD communication and the other four for LIN communication. All features and settings of this board can be configured with the dSPACE software ConfigurationDesk.

 

Key Benefits

With its support of CAN and LIN networks, the DS6301 is tailored to typical applications for automotive projects. With 8 channels per board, it offers a high channel density. Its integrated FPGA provides high flexibility and low I/O response times.  

Parameter Specification
General
  • 8 bus channels in total
  • 4 CAN/CAN FD channels
  • 4 LIN channels
  • 1 x 50-pin Sub-D connector
CAN communication Buses
  • CAN/CAN FD (ISO 11898-1, ISO 11898-5, and ISO 11898-6)
  • High-speed CAN (ISO 11898-2)
  • Fault-tolerant CAN (ISO 11898-3)

 

High-speed CAN / CAN FD

  • NXP TJA1145T/FD high-speed CAN transceiver
  • Data phase baud rate for CAN: 40 kBd ... 1 MBd
  • Data phase baud rate for CAN FD: 40 kBd ... 8 MBd
  • Use of customer-specific transceiver possible

 

Fault-tolerant CAN

  • NXP TJA1055 fault-tolerant CAN
  • Data rate: 40 kBaud ... 125 kBaud

 

Resistance

  • Software-configurable termination
  • High-speed CAN: 120 Ω
  • Fault-tolerant CAN: 560 Ω or 5.6 kΩ

 

LIN communication
  • Support of LIN standards (1.3, 2.0, 2.1, 2.2)
  • Overcurrent protection 20 mA

 

Transceiver
  • Infineon TLE 7257SJ
  • Data rate: 0 Bd ... 20 kBd

 

Resistance
  • 1 kΩ (software-configurable master termination)
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5.1 W

All of the I/O functions are software-configurable via ConfigurationDesk, so there is no need for hardware changes. This comprises functions such as termination and CAN feedthrough mode.

The DS6301 supports the standards typically used in automotive applications, such as high-speed CAN and CAN low power modes (Wake-up and Sleep).