dSPACE Release 6.4
(Released in July 2009)

The main innovations in dSPACE Release 6.4 are outlined below:

Product Details
ASM 2.1
  • ASM Trailer for ASM Vehicle Dynamics
  • ASM Engine support in ModelDesk
AutomationDesk® 2.3 (with Real-Time Testing 1.6) AutomationDesk:
  • Enable & disable test steps/sequences/folders for execution
  • Improved plotting & reporting, e.g. statistics and overviews at the beginning of the report
  • Real-Time Test Manager Library
  • Further extensions to COM API
Real-Time Testing 1.6:
  • RT-RS232 library
    • Direct access to onboard RS232 interfaces (DS1005 and DS1006)
    • No RTI block in model necessary
  • CAN library for MicroAutoBox
  • Restart data replay within a single RTT sequence
CalDesk® 3.0 New features with CalDesk:
  • Automate typical tasks in CalDesk, create and configure experiments automatically via scripts
  • Use integrated Python interpreter with syntax highlighting for scripting
  • Create virtual signals (calculated variables) during post-processing based on calculation formulas and recorded data
  • Create complex and photo-realistic layouts using an extended set of instruments
  • Import and update SDF files for dSPACE devices much faster
New features with Variable Editor:
  • Update A2L files directly in CalDesk via integrated Variable Editor, e.g. by parsing map files
  • Create individual groups in A2L files and copy and paste variable links
New features with ECU flash programming tool: Use DCI-GSI1 to flash brain-dead ECUs, i.e., ECUs whose flash contents may be corrupted.
ConfigurationDesk® 3.0.1
  • Bugfixes and minor enhancements
ControlDesk® 3.4
  • Support of DS802 PHS Link Board and DS4004 HIL Digital I/O Board
  • Bus Navigator with new design replaces CAN Navigator:
    • New tree view available (with messages grouped by ECUs)
    • Replay, monitoring, logging and filters directly accessible via tree
    • Logging, replay and monitoring can be started and stopped separately per controller or globally
  • Several enhancements for data capture, e.g.:
    • Option to preserve capture variables and capture settings when the simulation model (SDF file) is replaced
    • Export and import capture variables
    • Remove of all, selected, or invalid capture variables
    • New autoname mode for Stream to Disk data acquisition
  • Support for strings longer than 128 characters in TRC file (e.g., block and variable names)
  • Bugfixes and more minor enhancements
FlexRay Configuration Package 2.1
  • FIBEX 3.0 support
  • PDU-based signal chain
  • Signal manipulation via TRC file
  • Automatic alive counter realization, configurable via TRC file
  • Frame transmission manipulation via TRC file
  • UpdateBit manipulation via TRC file
  • Feature-based TRC file composition
  • Adjustable safety margins before and after FlexRay tasks
  • Send and receive wakeup pattern (also before network startup)
ModelDesk 2.2
  • Support of further ASM models:
    • ASM Engine
    • ASM Trailer
    • ASM Traffic
  • Bugfixes and minor enhancements
MotionDesk 2.1.3
  • Bugfixes and minor enhancements
RTI AUTOSAR Package 1.0
  • RTI extension for RCP and HIL to integrate existing AUTOSAR software components and compositions into a Simulink model
RTI CAN Blockset 2.6.8
  • Bugfixes and minor enhancements
RTI CAN MultiMessage Blockset 2.4.1
  • Support of baud rate change with inport
  • Bugfixes and minor enhancements
RTI LIN Blockset 2.0.17
  • Bugfixes and minor enhancements
RTI LIN MultiMessage Blockset 1.7
  • Support of node configuration
    • Configurable LIN network serial number
    • Enable/disable automatic configuration
    • Enable and disable node, also with automatic configuration
    • Support of configured and preconfigured slave nodes
    • Master request and slave response frames also useable in model during automatic node configuration
    • Slave: Conditional change NAD Service
    • Slave: Read by Identifier Service
RTI Bypass Blockset 2.6
  • Exchange ECU address, data type and value conversion method of variables dynamically without modifying and recompiling the Simulink model
  • Use improved m-API to exchange the ECU interface type more easily via automation scripts (e.g. from XCP on CAN to JTAG/OCDS).
  • Use RTI Bypass Blockset with and without A2L-files. ECU interface parameters typically contained in the A2L-file can be set via the m-API.
SystemDesk® 2.0.4
  • Performance improvements including RTE generation, Signal Mapping Editor, handling of diagrams
  • Enhancement of ECU configuration, RTE generation, simulation
  • Enhancement of the automation API
  • Bugfixes
TargetLink® 3.0.1
  • Support for AUTOSAR 3.0 and further AUTOSAR improvements
  • PIL support for Freescale MPC5561 with Diab Data and Greenhills Compiler
  • Selected bugfixes
  • Support for MathWorks Releases 2008b and 2009a
MATLAB support
  • R2006b
  • R2007a+
  • R2007b+
  • R2008a+
  • R2008b
  • R2009a
Operating System Support
  • Windows XP Professional (32 bit version only) SP3
  • Windows Vista (32 bit) SP1, SP2
  • Windows Vista (64 bit) SP2, with exception of CalDesk 3.0

Grundlegende Informationen Weiterführende Informationen

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.