For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

DS6241 D/A Board

Multi-channel D/A board

The DS6241 D/A Board provides 20 accurate analog out channels, with dedicated ground sense line and versatile synchronization mechanisms, trigger capabilities, and a high-throughput streaming interface. It can be used for rapid control prototyping (RCP) as well as hardware-in-the-loop (HIL) testing applications.

With its accurate analog out channels, the DS6241 can be used for rapid control prototyping (RCP) as well as hardware-in-the-loop (HIL) testing applications. During the development of ECU functions, it works as an analog signal generator for actuator control, e.g., for noise cancellation. In test scenarios, it generates signals for sensor simulation.

Key Benefits

Each of the DS6241's 20 output channels comes with a dedicated ground sense line and provides a resolution of 16 bits. The board offers a flexible simulation of sensor signals and a versatile synchronization mechanism. Furthermore, the DS6241 can be synchronized with SCALEXIO's angular processing unit.  

I/O Functionality

The 20 analog channels of the DS6241 are software-configurable and can be used as

  • Voltage Out
  • Wavetable Voltage Out
  • Waveform Voltage Out
  • Angular Wavetable Voltage Out

The channels are defined and configured graphically with dSPACE ConfigurationDesk.

Parameter Specification
General
  • 20 D/A output channels with independent D/A converters
  • 4 external trigger input lines
  • ± 60 V overvoltage protection
  • 1 x 50-pin Sub-D connector
D/A channels Output voltage
  • ± 10 V
Reference voltage
  • ± 2 V
Output current
  • ±5 mA (min.)
  • ±10 mA (typ.)
Resolution
  • 16 bit
Settling time
  • 5 µs (typ.)
Update rate
  • 0 … 500 kSPS
Gain error
  • ±0.03% (typ.)
Offset error
  • ±1 mV (typ.)
Trigger channels Input voltage
  • 0 ... 60 V
Threshold voltage
  • 1 … 23 V
Hysteresis
  • 0.2 V (typ.)
Input resistance
  • 361 kΩ (typ.)
Resolution
  • 8 bit
Internal communication interface
  • IOCNET (up to 2.5 Gbit/s link speed)
Physical size
  • 238 x 100 x 19 mm (9.4 x 4 x 0.8 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 7.5 W

Contact Information