Release 2014-B Implementation-Software Service Pack 2
Introduction
This Service Pack can be installed only on top of an existing RCP and HIL Release 2014-B Installation Set.
The following patches are contained in the Service Pack:
32-bit and 64-bit
- ConfigurationDesk 5.2p2
- DSRTSU 2.2p1
- ECU Interface Manager 1.5p1
- FlexRay Configuration Tool 3.4p2
- FlexRay Configuration Blockset 2.4p1
- Microtec PowerPC C/C++ Compiler 3.7.10p1
- QNX Compiler 6.5.0p1
- RTI 7.3p1
- RTI Bypass 3.3p1
- RTI CANMM 4.0p2
- RTI FPGA Programming Blockset 2.8.2
- RTIFLEXRAYCONFIG 3.4p1
- RTI MMSU 1.8p2
- RTI XCP on Ethernet 1.2.5p1
- RTLib1005 2.15p2
- RTLib1006 2.11p2
- RTLib1401 3.8p2
- RTLib1007 2.0.2
- SCALEXIO RTLib 3.1p1
For a detailed list of the solved problems and improvements refer to the ReadMe file below.
Limitations
When using the DS1007 processor board, or the DS4342 CAN-FD module, Firmware Archives 1.3.1, or newer, must be also be installed and the firmware must be updated on the hardware.
To reuse a model with blocks from the RTI CAN MultiMessage Blockset, you must update the S‑functions for all the RTICANMM blocks and save the model before modifying the CAN configuration.
For instructions how to do that, please refer to the New Features and Migration Guide for Release 2014-B.
For instructions how to do that, please refer to the New Features and Migration Guide for Release 2014-B.
Installation Notes & Download
32-bit
64-bit
Tags
| Date | 2015-08-17 |
| 软件类型 | 实现软件 |
| 产品 | ConfigurationDesk, RTI (Real-Time Interface) |
| 资料信息 | 补丁 |
| 信息类别 | 故障排除 |
| dSPACE 版本发布 | 2014-B |