For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

Release 2014-B Implementation-Software Service Pack 2

Introduction 

This Service Pack can be installed only on top of an existing RCP and HIL Release 2014-B Installation Set.
 
 
The following patches are contained in the Service Pack: 
 
32-bit and 64-bit
  • ConfigurationDesk 5.2p2
  • DSRTSU 2.2p1
  • ECU Interface Manager 1.5p1
  • FlexRay Configuration Tool 3.4p2
  • FlexRay Configuration Blockset 2.4p1
  • Microtec PowerPC C/C++ Compiler 3.7.10p1
  • QNX Compiler 6.5.0p1
  • RTI 7.3p1
  • RTI Bypass 3.3p1
  • RTI CANMM 4.0p2
  • RTI FPGA Programming Blockset 2.8.2
  • RTIFLEXRAYCONFIG 3.4p1
  • RTI MMSU 1.8p2
  • RTI XCP on Ethernet 1.2.5p1
  • RTLib1005 2.15p2
  • RTLib1006 2.11p2
  • RTLib1401 3.8p2
  • RTLib1007 2.0.2
  • SCALEXIO RTLib 3.1p1
For a detailed list of the solved problems and improvements refer to the ReadMe file below.
 
Limitations 
 
When using the DS1007 processor board, or the DS4342 CAN-FD module, Firmware Archives 1.3.1, or newer, must be also be installed and the firmware must be updated on the hardware.
 
To reuse a model with blocks from the RTI CAN MultiMessage Blockset, you must update the S‑functions for all the RTICANMM blocks and save the model before modifying the CAN configuration. 
For instructions how to do that, please refer to the New Features and Migration Guide for Release 2014-B.
 
Installation Notes & Download
 
32-bit 
Readme
DS_ImplSW_14B_SP2_x86_p2_348236.exe 
 
64-bit
Readme 
DS_ImplSW_14B_SP2_x64_p2_348236.exe 

 

Related Topics

Tags

Date 2015-08-17
Software Type Implementation Software
Product ConfigurationDesk, Real-Time Interface (RTI)
Type Patches
Information Category Troubleshooting
dSPACE Release 2014-B