Release 2014-B Implementation-Software Service Pack 2

Introduction 

This Service Pack can be installed only on top of an existing RCP and HIL Release 2014-B Installation Set.
 
 
The following patches are contained in the Service Pack: 
 
32-bit and 64-bit
  • ConfigurationDesk 5.2p2
  • DSRTSU 2.2p1
  • ECU Interface Manager 1.5p1
  • FlexRay Configuration Tool 3.4p2
  • FlexRay Configuration Blockset 2.4p1
  • Microtec PowerPC C/C++ Compiler 3.7.10p1
  • QNX Compiler 6.5.0p1
  • RTI 7.3p1
  • RTI Bypass 3.3p1
  • RTI CANMM 4.0p2
  • RTI FPGA Programming Blockset 2.8.2
  • RTIFLEXRAYCONFIG 3.4p1
  • RTI MMSU 1.8p2
  • RTI XCP on Ethernet 1.2.5p1
  • RTLib1005 2.15p2
  • RTLib1006 2.11p2
  • RTLib1401 3.8p2
  • RTLib1007 2.0.2
  • SCALEXIO RTLib 3.1p1
For a detailed list of the solved problems and improvements refer to the ReadMe file below.
 
Limitations 
 
When using the DS1007 processor board, or the DS4342 CAN-FD module, Firmware Archives 1.3.1, or newer, must be also be installed and the firmware must be updated on the hardware.
 
To reuse a model with blocks from the RTI CAN MultiMessage Blockset, you must update the S‑functions for all the RTICANMM blocks and save the model before modifying the CAN configuration. 
For instructions how to do that, please refer to the New Features and Migration Guide for Release 2014-B.
 
Installation Notes & Download
 
32-bit 
Readme
DS_ImplSW_14B_SP2_x86_p2_348236.exe 
 
64-bit
Readme 
DS_ImplSW_14B_SP2_x64_p2_348236.exe 

 

Tags
Date 2015-08-17
Software-Typ Implementierungssoftware
Produkt ConfigurationDesk, RTI (Real-Time Interface)
Informationstyp Patches
Informationskategorie Problembehandlung
dSPACE Release 2014-B

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.