Release 2014-B Implementation-Software Service Pack 2
Introduction
This Service Pack can be installed only on top of an existing RCP and HIL Release 2014-B Installation Set.
The following patches are contained in the Service Pack:
32-bit and 64-bit
- ConfigurationDesk 5.2p2
- DSRTSU 2.2p1
- ECU Interface Manager 1.5p1
- FlexRay Configuration Tool 3.4p2
- FlexRay Configuration Blockset 2.4p1
- Microtec PowerPC C/C++ Compiler 3.7.10p1
- QNX Compiler 6.5.0p1
- RTI 7.3p1
- RTI Bypass 3.3p1
- RTI CANMM 4.0p2
- RTI FPGA Programming Blockset 2.8.2
- RTIFLEXRAYCONFIG 3.4p1
- RTI MMSU 1.8p2
- RTI XCP on Ethernet 1.2.5p1
- RTLib1005 2.15p2
- RTLib1006 2.11p2
- RTLib1401 3.8p2
- RTLib1007 2.0.2
- SCALEXIO RTLib 3.1p1
For a detailed list of the solved problems and improvements refer to the ReadMe file below.
Limitations
When using the DS1007 processor board, or the DS4342 CAN-FD module, Firmware Archives 1.3.1, or newer, must be also be installed and the firmware must be updated on the hardware.
To reuse a model with blocks from the RTI CAN MultiMessage Blockset, you must update the S‑functions for all the RTICANMM blocks and save the model before modifying the CAN configuration.
For instructions how to do that, please refer to the New Features and Migration Guide for Release 2014-B.
For instructions how to do that, please refer to the New Features and Migration Guide for Release 2014-B.
Installation Notes & Download
32-bit
64-bit
Tags
| Date | 2015-08-17 |
| 소프트웨어 타입 | Implementation Software |
| 제품군 | ConfigurationDesk, RTI (Real-Time Interface) |
| 인포메이션 타입 | 패치 |
| 인포메이션 카테고리 | Troubleshooting |
| dSPACE Release | 2014-B |