For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

DS6321 UART Board

SCALEXIO I/O board for connecting simulators to external devices with serial interfaces

With the DS6321 UART Board, you can connect a SCALEXIO system to ECUs or other external devices with serial interfaces.

Application Areas

The DS6321 UART Board provides four independent channels, each of which can be individually configured. The board is well suited for both rapid control prototyping (RCP) and hardware-in-the-loop (HIL) applications and can be configured directly from ConfigurationDesk. 

Parameter Specification
General
  • 4 independent serial communication channels, each with a 16550-compatible UART (universal asynchronous receiver/transmitter)
  • Supported protocols: RS232-C, RS422, RS485, K-line
  • Each channel supports RTS/CTS
  • 50-pin Sub-D connector
Interrupts
  • RX-, TX-FIFO-empty-, LSR-, and MSR-interrupts
Baud rate range: RS232
  • Up to 1 Mbit/s
Baud rate range: RS422
  • Up to 10 Mbit/s
Baud rate range: RS485
  • Up to 10 Mbit/s
Baud rate range: K-line
  • Up to 19.2 kbit/s
Parity bits
  • Even, odd, or no parity
Stop bits
  • 1, 1.5, or 2 bits
Word length
  • 5, 6, 7, or 8 bits
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5 W

Contact Information