DS6321 UART Board

SCALEXIO I/O board for connecting simulators to external devices with serial interfaces

With the DS6321 UART Board, you can connect a SCALEXIO system to ECUs or other external devices with serial interfaces.

Application Areas

The DS6321 UART Board provides four independent channels, each of which can be individually configured. The board is well suited for both rapid control prototyping (RCP) and hardware-in-the-loop (HIL) applications and can be configured directly from ConfigurationDesk. 

Parameter Specification
  • 4 independent serial communication channels, each with a 16550-compatible UART (universal asynchronous receiver/transmitter)
  • Supported protocols: RS232-C, RS422, RS485, K-Line
  • Each channel supports RTS/CTS
  • 50-pin Sub-D connector
  • RX-, TX-FIFO-empty-, LSR-, and MSR-interrupts
Baud rate range: RS232
  • Up to 1 Mbit/s
Baud rate range: RS422
  • Up to 10 Mbit/s
Baud rate range: RS485
  • Up to 10 Mbit/s
Baud rate range: K-Line
  • Up to 19.2 kbit/s
Parity bits
  • Even, odd, or no parity
Stop bits
  • 1, 1.5, or 2 bits
Word length
  • 5, 6, 7, or 8 bits
Internal communication interface
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5 W

  • SCALEXIO Product Information, PDF, English, 16194 KB
Support Contact Information

혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.

저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.