DS6321 UART Board

SCALEXIO I/O board for connecting simulators to external devices with serial interfaces

With the DS6321 UART Board, you can connect a SCALEXIO system to ECUs or other external devices with serial interfaces.

Application Areas

The DS6321 UART Board provides four independent channels, each of which can be individually configured. The board is well suited for both rapid control prototyping (RCP) and hardware-in-the-loop (HIL) applications and can be configured directly from ConfigurationDesk. 

Parameter Specification
General
  • 4 independent serial communication channels, each with a 16550-compatible UART (universal asynchronous receiver/transmitter)
  • Supported protocols: RS232-C, RS422, RS485, K-line
  • Each channel supports RTS/CTS
  • 50-pin Sub-D connector
Interrupts
  • RX-, TX-FIFO-empty-, LSR-, and MSR-interrupts
Baud rate range: RS232
  • Up to 1 Mbit/s
Baud rate range: RS422
  • Up to 10 Mbit/s
Baud rate range: RS485
  • Up to 10 Mbit/s
Baud rate range: K-line
  • Up to 19.2 kbit/s
Parity bits
  • Even, odd, or no parity
Stop bits
  • 1, 1.5, or 2 bits
Word length
  • 5, 6, 7, or 8 bits
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5 W

  • SCALEXIO Product Information, PDF, English, 16194 KB
Support Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.