SHEFEX II Launched Successfully

Research on an innovative new heat shield

Launch of SHEFEX II on June 22, 2012, from the Norwegian rocket launch pad Andøya. Photo: Trond Abrahamsen, Andøya Rocket Range. 

With SHEFEX II (Sharp Edge Flight Experiment II), the German Aerospace Center (DLR) is researching innovative heat shield technologies that are considerably less expensive and easier to service than those used for existing space vehicles. This is due to the simple design: The heat shield of the SHEFEX nose cone consists of flat panels that are easier and therefore cheaper to manufacture than the curved shapes currently in common use.
On June 22, 2012, a high-altitude test rocket was launched from the Norwegian launch pad Andøya, carrying the SHEFEX nose cone up to an altitude of approx. 180 km. It reached a speed of 11,000 km/h, which is about 11 times the speed of sound. During reentry into the atmosphere, the SHEFEX nose cone withstood temperatures of over 2,500 degrees Celsius, and its 300+ sensors transmitted a wealth of measurement data to the ground station. Its flight was actively controlled by four control fins called canards.
Advance Testing with dSPACE System
The canards controlled the flight of the SHEFEX with the help of several navigation systems (including GPS and inertial navigation) whose interaction was tested on the ground beforehand. This was done with a dSPACE system consisting of a DS1006 Processor Board, various I/O boards and the experiment software ControlDesk (as reported in dSPACE Magazine 3/2010). To test the SHEFEX navigation computer, the system calculated the trajectory and the navigation systems' flight-attitude-dependent signals. In view of the rocket's high speed, particular attention was paid to synchronizing the signals with the internal clock of the navigation computer.
Further information:
Article on SHEFEX II from dSPACE Magazine 3/2010:

More Information Success Stories

혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.

저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.