DS4342 CAN FD Interface Module

Module for interfacing to CAN FD buses

The dSPACE DS4342 CAN FD Interface Module (FD = Flexible Data Rate) can be used with the DS4505 Interface Board or MicroAutoBox II 1401/1505/1507, 1401/1507, 1401/1511/1514 or 1401/1513/1514. The DS4342 provides two independent CAN channels, each of which can be used for CAN FD or for CAN. Network management functions such as wake-up and sleep are also included.

  • Connection to CAN FD buses
  • Usable with the DS4505 Interface Board or MicroAutoBox

The dSPACE DS4342 CAN FD Interface Module (FD = Flexible Data Rate) can be used with the DS4505 Interface Board or MicroAutoBox II variants. The DS4342 provides two independent CAN channels, each of which can be used for CAN FD or for CAN. Network management functions such as wake-up and sleep are also included. The DS4342 also provides a software-configurable, switchable termination circuit.

Parameter Specification
General
  • 2 CAN/CAN FD channels
  • Supports the DS4505 Interface Board and can be used with MicroAutoBox II 1401/1507, 1401/1511/1514, and 1401/1513/1514
  • Automatic detection of Industry Package (IP) for MicroAutoBox 1507 or fast COM mode for MicroAutoBox 1512 and DS4505 Interface Board
  • Supported by RTI CAN MultiMessage Blockset
  • Support of ISO CAN FD and non-ISO CAN FD
  • Switchable termination circuit (software configurable)
  • Capable of ISO 11898-5 network management and low power modes
  • Capable of ISO 11898-6 partial networking
  • Capable of handling ISO 11898-2 CAN or CAN FD on every channel
Hardware details
  • NXP TJA1145T CAN Transceiver
  • Requires one slot

  • DS4505 Interface 产品信息, PDF, 英語, 469 KB
实时接口 (RTI) 在 dSPACE 硬件上自动执行 MATLAB®/Simulink®/Stateflow® 模型 MicroAutoBox Hardware 紧凑型单机版原型开发单元，配有实时硬件、I/O 及信号调理功能 DS4505 Interface Board 将 PHS硬件连接至FlexRay和/或CAN FD通信系统
Related Topics Contact Information

订阅新闻通讯

订阅/管理订阅/取消订阅 dSPACE新闻简讯