Introduction
Problems Fixed by This Patch
Limitations
Installation Notes & Download
Introduction
This patch can be installed only after the installation of dSPACE Release 5.2.
Problems Fixed by This Patch
When you update to dSPACE Release 5.2 and reopen your existing model, the RTICAN Controller Setup blocks in the model determine wrong values for the CAN controller frequencies and for the bit timing registers BTR0 and BTR1.
As a result, CAN communication on the related CAN controllers will be corrupt.
The patch fixes the problem described above.
Limitations
The patch fixes the problem described above only if you have not yet opened and saved the Simulink® model after upgrading to dSPACE Release 5.2.
Otherwise, use the workaround described in the Installation Notes file.
Installation Notes & Download
Installation Notes (2.4 KB)
RTICAN261p1.exe (199 KB)
Date | 2007-01-23 |
소프트웨어 타입 | Implementation Software, Bus and Network Software |
제품군 | RTI (Real-Time Interface), RTI CAN Blockset |
인포메이션 타입 | 패치 |
인포메이션 카테고리 | Troubleshooting |
dSPACE Release | Prior to 2013-A |
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.