RTICAN 2.6.1 Patch 1 for Release 5.2

Introduction
Problems Fixed by This Patch
Limitations
Installation Notes & Download

Introduction

This patch can be installed only after the installation of dSPACE Release 5.2.

Problems Fixed by This Patch

When you update to dSPACE Release 5.2 and reopen your existing model, the RTICAN Controller Setup blocks in the model determine wrong values for the CAN controller frequencies and for the bit timing registers BTR0 and BTR1.
As a result, CAN communication on the related CAN controllers will be corrupt.

The patch fixes the problem described above.

Limitations

The patch fixes the problem described above only if you have not yet opened and saved the Simulink® model after upgrading to dSPACE Release 5.2.

Otherwise, use the workaround described in the Installation Notes file.

Installation Notes & Download

Installation Notes (2.4 KB)
RTICAN261p1.exe (199 KB)

Tags
Date 2007-01-23
Software-Typ Implementierungssoftware, Bus- und Netzwerk-Software
Produkt RTI (Real-Time Interface), RTI CAN Blockset
Informationstyp Patches
Informationskategorie Problembehandlung
dSPACE Release Bis 2013-A

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.