The DS2690 is used in SCALEXIO hardware-in-the-loop simulators for signal measurement as well as signal generation. It provides digital I/O channels, such as Digital In, PWM In, Digital Out, and PWM Out.
The DS2690 Digital I/O Board is the tailored SCALEXIO solution for hardware-in-the-loop (HIL) simulation of body electronics ECUs. Vehicle body applications such as electric window lift and windscreen wipers require many high-current digital I/O channels, as well as the ability to simulate failures. Together with a SCALEXIO system, the DS2690 is galvanically isolated.
The DS2690 offers a large number of dedicated digital I/O channels for signal generation and measurement. Their supported I/O functionalities cover exactly the ones needed for body electronic ECUs. Real loads can be connected to each channel individually. An onboard failure routing unit (FRU) enables failure simulation on all channels.
The DS2690 offers digital channels that are either predefined for signal measurement or signal generation, or can be individually configured. Channels for signal measurement and generation are usable as
The signal types and channel bundling are configured with ConfigurationDesk.
Testing ECUs under realistic circumstances sometimes requires real currents, so real loads can be connected externally. Substitute loads are available internally as well.
Parameter | Specification | |
---|---|---|
General |
|
|
Signal measurement (Digital In 2) |
|
|
Signal generation (Digital Out 2) |
|
|
Signal measurement or generation (Digital In/Out 1) |
|
|
Digital In |
|
|
Digital Out |
|
|
Fault simulation |
|
|
Internal communication interface |
|
|
Physical data | Physical size |
|
Voltage supply |
|
|
Typical power consumption |
|
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.