DS6341 CAN Board

SCALEXIO I/O board for connecting simulators to CAN bus systems

The DS6341 provides four CAN/CAN FD channels for a SCALEXIO system. 

Application Areas

The DS341 CAN Board is the interface between a SCALEXIO system and CAN/CAN FD bus systems. It provides four channels for RCP and HIL applications. Network management functions such as wake-up and sleep are also included as a software-configurable, switchable termination circuit.

Key Benefits

  • Independent and fully featured CAN/CAN FD channels that can be used for all kinds of application and topologies
  • All I/O functions are software-configurable via ConfigurationDesk, so no hardware changes are necessary.  

Parameter Specification
  • 4 independent CAN/CAN FD channels
  • Support of CAN low power modes ISO 11898-5 (wake-up and sleep)
  • Support of CAN partial networking ISO 11898-6
  • Support of J1939
  • Support of software-switchable CAN feed-through mode
  • CAN/CAN FD (ISO 11898-1, ISO 11898-5, ISO 11898-6, and non-ISO)
  • High-speed CAN (ISO 11898-2)
  • Fault-tolerant CAN (ISO 11898-3)
  • 1 x 50-pin Sub-D connector
CAN communication (CAN 2)
  • NXP TJA1145T/FD high-speed CAN transceiver
  • Data phase baud rate for CAN: 40 kBd ... 1 MBd
  • Data phase baud rate for CAN FD: 40 kBd ... 8 MBd
  • Usable in SAE J2284-4 and SAE J2284-5 CAN networks
  • Use of customer-specific transceiver possible
  • Software-configurable termination: 560 Ω or 5.6 kΩ
  • NXP TJA1055 fault-tolerant CAN: Data rate: 40 kBaud ... 125 kBaud
  • Software-configurable termination: 120 Ω
Internal communication interface
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5 W

Support Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.