SCALEXIO Serial Interface Solution

Using Serial Peripheral Interface (SPI) and Inter-Integrated Circuit (I2C) bus

The SCALEXIO Serial Interface Solution lets you connect a SCALEXIO real-time system to an SPI and I2C bus. The solution can be used as decentralized I/O.  

The SCALEXIO Serial Interface Solution lets you use the Serial Peripheral Interface (SPI) and Inter-Integrated Circuit (I2C) bus with a SCALEXIO system. The solution consists of an I/O solution base board equipped with specific I/O-hardware and software for parameterizing these interfaces with ConfigurationDesk.

The solution can be used with a SCALEXIO rack system, a SCALEXIO LabBox, a SCALEXIO AutoBox or an external I/O unit. The use of an external I/O unit makes it possible to reduce the distance to the device under test, which allows higher frequencies. 

Feature SPI I2C
General
  • Software-adjustable signal voltage level (3.3 / 5 V)
  • Communication with up to 20 MHz
  • Software-adjustable signal voltage level (3.3 / 5 V)
  • Communication with up to 1 MHz (Fast-mode plus)
Master features
  • Up to 4 masters
  • Adjustable timing for each chip select cycle
  • Adjustable data format for each chip select cycle
  • Up to 5 master nodes
  • Supports the following speed modes: Standard-mode, Fast-mode and Fast-mode plus
  • 10 bit addressing possible
Slave features
  • Up to 12 slaves
  • Adjustable cycle format and data bit width for each slave
  • Star or daisy chain topology available
  • Up to 5 slave nodes
  • Each physical slave node can have up to 16 logical slaves with different addresses
  • For each slave up to 16 bytes can be received or send
  • Clock stretching is possible
Internal communication interface
  • IOCNET
  • IOCNET
Typical power consumption
  • 25 W
  • 25 W

  • SCALEXIO Product Information, PDF, English, 16194 KB
Contact Information

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.