For a better experience on, enable JavaScript in your browser. Thank you!

DS6221 A/D Board

Fast SCALEXIO A/D Board for precise measurements

The DS6221 A/D Board provides 16 high-speed analog channels, versatile trigger capabilities, and a high-throughput streaming interface. It is an excellent choice for precise measurements, even of fast analog signal sequences.  

Application Areas 

With its accurate high-speed analog channels and versatile trigger capabilities, the DS6221 is an excellent fit for precise measurements, even of fast analog signals sequences, in various applications areas. It can be used for scenarios such as the development and testing of electric drives applications or vibration and noise cancellation applications as well as for high volume data acquisition in test bench scenarios.

Key Benefits

Each of the 16 differential input channels included in the DS6221 has an independent A/D converter with a resolution of 16 bits and a minimum conversion time of 250 ns. Advanced configurable  channel-specific triggers, such as onboard timers, external trigger input lines, or predefined angles of SCALEXIO’s angular processing unit, allow for the precise event-based capturing of analog values and signal sequences. For comprehensive and fast data capturing the IOCNET-based streaming interface provides a continuous sample data throughput of up to 40 MSPS to the real-time application1).

1) Depends on the SCALEXIO Processing Unit and the system topology.

I/O Functionality

The 16 analog input channels of the DS6221 are software-configurable and can be used as

  • Voltage In
  • Voltage Signal Capture

The channels are defined and configured graphically with dSPACE ConfigurationDesk.

Parameter Specification
  • 16 A/D input channels (differential) with independent A/D converters
  • 250 ns ... 100 ms trigger interval (adjustable)
  • 8 external trigger input lines
  • +/- 60 V input overvoltage protection
  • Up to 40 MSPS max. total troughput1)
  • 1 x 50-pin Sub-D connector
A/D channels (Analog In 6) Resolution
  • 16 bit

Conversion time

  • 250 ns
Input voltage range
  • +/- 10 V
Input voltage working range
  • +/- 12 V
Offset error
  • +/- 1 mV
Gain error
  • +/- 0.1 % of FSR
Input offset drift
  • +/- 20 µV/K
Gain drift
  • +/- 10 ppm/K
SNR (signal-to-noise-ratio)
  • > 85 dB at 10 kHz
THD (total harmonic distortion)
  • -100 dB (typ., at 10 kHz, 25 °C)
  • -93 dB (typ., at 100 kHz, 25 °C) (for balanced signals)
-3 dB cutoff frequency
  • 1.9 MHz
Input impedance
  • 1 MOhm
Digital trigger input (Trigger In 1) Input threshold voltage
  • 0 V ... 24 V
  • 600 mV (typ.)
Interrupt controller
  • Start of conversion
  • End of conversion
External trigger input Input voltage
  • 0 V ... 24 V
Internal communication interface
  • IOCNET (up to 2.5 Gbit/s link speed)
Physical data Physical size
  • 238 x 100 x 19 mm (9.4 x 4 x 0.8 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 14.4 W
1) Depends on the SCALEXIO Processing Hardware and the system topology

Contact Information