Introduction
This Service Pack can be installed only on an existing RCP and HIL Software Release 2021-A.
If Service Pack 1 has been installed before, it must be removed before this installation.
For a detailed list of solved problems and improvements refer to the ReadMe file below.
Installation Notes & Download
Note
Before installing this ImplSW 2021-A SP4 Setup, you must first uninstall a formerly installed ImplSW 2021-A SP1 manually. Then, you can install this ImplSW 2021-A SP4. If no other service pack was installed before, you can directly install this ImplSW 2021-A SP4.
You must also download Firmware Archives 3.3.7 or newer and update the firmware of the real-time hardware, i.e., SCALEXIO systems, DS6001 systems, or MicroAutoBox III.
ConfigurationDesk/Bus Manager projects and/or working views (CAFX files) that are created with this Bus Manager version cannot be imported to previously delivered Bus Manger versions.This also applies if a previously delivered Bus Manager version is based on a later dSPACE Release. The import of the projects and/or CAFX files to a later dSPACE Release requires additional patches or service packs for that Release.
Date | 2022-05-02 |
소프트웨어 타입 | Implementation Software |
제품군 | ConfigurationDesk |
인포메이션 타입 | 패치 |
인포메이션 카테고리 | Troubleshooting |
dSPACE Release | 2021-A |
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.