Introduction
This Service Pack can be installed only on an existing RCP and HIL Software Release 2021-A.
If Service Pack 1 has been installed before, it must be removed before this installation.
For a detailed list of solved problems and improvements refer to the ReadMe file below.
Installation Notes & Download
Note
Before installing this ImplSW 2021-A SP4 Setup, you must first uninstall a formerly installed ImplSW 2021-A SP1 manually. Then, you can install this ImplSW 2021-A SP4. If no other service pack was installed before, you can directly install this ImplSW 2021-A SP4.
You must also download Firmware Archives 3.3.7 or newer and update the firmware of the real-time hardware, i.e., SCALEXIO systems, DS6001 systems, or MicroAutoBox III.
ConfigurationDesk/Bus Manager projects and/or working views (CAFX files) that are created with this Bus Manager version cannot be imported to previously delivered Bus Manger versions.This also applies if a previously delivered Bus Manager version is based on a later dSPACE Release. The import of the projects and/or CAFX files to a later dSPACE Release requires additional patches or service packs for that Release.
Date | 2022-05-02 |
ソフトウェアタイプ | 実装 |
製品 | ConfigurationDesk |
インフォメーション | パッチ |
情報カテゴリー | トラブルシューティング |
dSPACE Release | 2021-A |
最新の技術開発動向をつかんで、イノベーションを加速。
メールマガジンの購読希望・変更/配信停止手続き