Introduction
This Service Pack can be installed only on an existing RCP and HIL Software Release 2021-A.
If Service Pack 1 has been installed before, it must be removed before this installation.
For a detailed list of solved problems and improvements refer to the ReadMe file below.
Installation Notes & Download
Note
Before installing this ImplSW 2021-A SP4 Setup, you must first uninstall a formerly installed ImplSW 2021-A SP1 manually. Then, you can install this ImplSW 2021-A SP4. If no other service pack was installed before, you can directly install this ImplSW 2021-A SP4.
You must also download Firmware Archives 3.3.7 or newer and update the firmware of the real-time hardware, i.e., SCALEXIO systems, DS6001 systems, or MicroAutoBox III.
ConfigurationDesk/Bus Manager projects and/or working views (CAFX files) that are created with this Bus Manager version cannot be imported to previously delivered Bus Manger versions.This also applies if a previously delivered Bus Manager version is based on a later dSPACE Release. The import of the projects and/or CAFX files to a later dSPACE Release requires additional patches or service packs for that Release.
Date | 2022-05-02 |
Software-Typ | Implementierungssoftware |
Produkt | ConfigurationDesk |
Informationstyp | Patches |
Informationskategorie | Problembehandlung |
dSPACE Release | 2021-A |
Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.
Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.