Patch 2.0p2 for dSPACE Release 2.0, Build-No. 1999040901, corrects the following problems:
The patch diskette also contains an update of the DS1103 CAN Firmware 1.0. This update has to be performed by hand.
If you use one or more of these products from CD 2.0, it is recommended that you install Patch 2.0p2. Please remember that you have to reinstall the patch after reinstalling dSPACE software.
NOTE: Do not use this patch for releases other than those stated in the header. If in doubt, make sure that the Build-No. given matches your CD Build-No.
Preparing Patch 2.0p2
Installing the Patch for RTK, RTI CAN, ControlDesk, RTI
Before you can install the patch you must have installed the dSPACE software you want to patch and rebooted your system. You also need to close MATLAB® before invoking the patch.
Installing the DS1103 CAN Firmware Update
To update the DS1103 CAN firmware, follow the steps below. NOTE: Before updating the firmware make sure that your DS1103 is registered.
Download
20p2.exe (448KB)
Date | 1999-05-28 |
Type de logiciel | Logiciels d’implémentation, Logiciels d'expérimentation et de visualisation, Logiciels pour les bus et réseaux, Logiciels d'interface de calculateurs |
Produit | ControlDesk, Matériels de prototypage rapide et HIL, RTI (Real-Time Interface) |
Type d’information | Patches |
Catégorie d’information | Phase de débogage |
Release dSPACE | Avant la 2013-A |
Faire avancer l'innovation. Toujours à la pointe de l'évolution technologique.
S’abonner à nos newsletters, gérer ses abonnements ou se désabonner. La newsletter mensuelle contenant toutes les informations liées à l’aéronautique et défense.