For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

CD 3.0, Build-No. 2001013101

The following information is available for this CD.

Information Available for this CD
Compatibility with non-dSPACE Software
Board-Specific Software
Documentation
CDP Software Bundles
Complete Contents List of CD 3.0

 

Compatibility with non-dSPACE Software

The software included on this dSPACE CD is compatible with the following non-dSPACE software.

Software and Version Requirements for dSPACE Products
Windows 95, Windows 98, Windows NT 4.0 (Service Pack 3) or Windows 2000**.

For Windows NT 4.0, Service Pack 6a is strongly recommended.
For Windows 2000, Service Pack 1 is recommended.
Required for all dSPACE software.
MATLAB® Version:
5.3.0.10183 (R11) or 5.3.1.29215a (R11.1) with Windows 95, Windows 98, and Windows NT 4.0, but NOT with Windows 2000.

Note: MATLAB 5.3.x has not been released for Windows 2000.

6.0.0.88 (R12)
Required when using the following dSPACE software:
RTI1003, RTI1005, RTI1102, RTI1103, RTI1401, RTI-MP, RTI CAN Blockset, FFTACC Blockset and MLIB/MTRACE
Microsoft Internet Explorer Version 4.0 or higher
(Internet Explorer 5.0 is supplied on this CD).
Required to access the online documentation
DS1102/DS1003/DS230x Compiler Version 4.7 or 5.11 Required when using the following dSPACE hardware:
DS1003, DS1102 or DS230x
DS1005/DS1103/DS1401 (MicroAutoBox) Compiler Version 1.8m* Required when using the following dSPACE hardware:
DS1005, DS1103 or DS1401 (MicroAutoBox)
DS1004 Compiler Version 1.1.1* Required when using the following dSPACE hardware:
DS1003/DS1004 (AlphaCombo)


*NOTE: These compilers are supplied on this CD and are installed automatically during installation if purchased with the dSPACEsystem.

**NOTE: Windows 2000 is only supported with MATLAB 6 (R12) / RTI 4.0.

The DS1102/DS1003/DS230x Compiler is supplied by Texas Instruments.
For information on known problems regarding the TI C Compiler please see the CD's ReadMe.txt file.

Board-Specific Software

The following board-specific software is included on this CD.

Software and Version Description
Device Driver Version 1.85 For use with all dSPACE software and hardware
ControlDesk® Basic 2.0 For use with all dSPACE hardware
RTLib1003 Version 3.1.6
RTLib1004 Version 2.4
RTLib1005 Version 1.1.4
RTLib1102 Version 4.3.1
RTLib1103 Version 1.3.5
RTLib1401 Version 1.3.6
Real-time libraries for use with the respective dSPACE boards

 

Documentation

The following documentation versions are valid for this CD. All the documents listed below are also available online.

Documentation Version
CD3.0´s What’s New and Migration guide January 2001
DS1102 Installation and Configuration Guide January 2001
DS1103 Installation and Configuration Guide January 2001
DS1003/DS1004 Installation and Configuration Guide for Modular and Multiprocessor Systems January 2001
DS1005 Installation and Configuration Guide for Modular and Multiprocessor Systems January 2001
MicroAutoBox Installation and Configuration Guide January 2001
ControlDesk Experiment Guide January 2001
ControlDesk Automation Guide January 2001
ControlDesk Test Automation Guide January 2001
RTI and RTI-MP Implementation Guide for RTI 3.6 and RTI-MP 3.6 January 2001
RTI and RTI-MP Implementation Guide for RTI 4.0 and RTI-MP 4.0 January 2001
MLIB/MTRACE Interface and Trace Libraries January 2001
RealMotion 3D Visualization Guide January 2001

 

CDP Software Bundles

The following software bundles are included on this CD. For network-based software the same version numbers apply.

The CDPs are comprised of ControlDesk Base Instrumentation Kit and ControlDeskAutomation Kit, RTI, MLIB and MTRACE. The CDP-MP package for multiprocessor systems includes RTI-MP in addition to the CDP package.

CDP1102 for the DS1102 DSP Board Version
ControlDesk Standard 2.0
RTI1102 3.6,
4.0*
MLIB/MTRACE 4.2

 

CDP1103 for the DS1103 PPC Controller Board Version
ControlDesk Standard 2.0
RTI1103 3.6,
4.0*
MLIB/MTRACE 4.2

 

CDP1003 for the DS1003 DSP Board Version
ControlDesk Standard 2.0
RTI1003 3.6,
4.0*
MLIB/MTRACE 4.2

 

CDP1003-MP for Multi DS1003 DSP Board and the DS1003/DS1004 (AlphaCombo) Version
ControlDesk Standard 2.0
RTI1003 3.6,
4.0*
RTI-MP 3.6,
4.0*
MLIB/MTRACE 4.2

 

CDP1005 for the DS1005 PPC Board Version
ControlDesk Standard 2.0
RTI1005 3.6,
4.0*
MLIB/MTRACE 4.2

 

CDP1005-MP for Multi DS1005 PPC Board Version
ControlDesk Standard 2.0
RTI1005 3.6,
4.0*
RTI-MP 3.6,
4.0*
MLIB/MTRACE 4.2

 

CDP1401 for DS1401 (MicroAutoBox) Version
ControlDesk Standard 2.0
RTI1401 3.6,
4.0*
MLIB/MTRACE 4.2


*NOTE: These products can only be installed under MATLAB version 6.0.0.88(R12).

Note: All product dependencies for CD 3.0 are handled automatically by the installation program.