|
This Plot Utility is a MATLAB script which displays the difference of measurement data from different sources, such as MATLAB simulations and ControlDesk.
You can compare measurement data by displaying the differences on a MATLAB plot chart. For example, you can compare results of Model in the Loop Simulations (MILS) in MATLAB and results of Hardware in the Loop Simulations (HILS) on a dSPACE simulator
Please note that the utilities are not part of an official dSPACE release and therefore not subjected to the same quality assurance measures as an official dSPACE release. dSPACE GmbH makes no warranty of any kind with regard to these utilities, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. dSPACE GmbH shall not be liable for errors contained herein or direct, indirect, special, incidental, or consequential damages in connection with the furnishing, performance, or use of these utilities.
|
This article was written by dSPACE Japan K. K.
Date | 2020-03-27 |
Software Type | Experiment and Visualization Software |
Product | ControlDesk |
Information Type | Software Demos |
Information Category | Demos, Working with |
Drive innovation forward. Always on the pulse of technology development.
Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.