For a better experience on dSPACE.com, enable JavaScript in your browser. Thank you!

CD 2.3.1, Build-No. 2000040301

Special Characteristics of CD 2.3.1:

  • Software support for DS1005 (single and MP), and DS2210 with DS1005, DS1003 or AlphaCombo
  • Support for handcoders and MATLAB® 5.3 only- MATLAB 5.1/5.2 support phased out
  • Trace and Cockpit phased out

For more information see the chapter "Known Limitations" in the CD ReadMe file.

Information Available for this CD
Compatibility with non-dSPACE Software
Board-Specific Software
Documentation
CDP Software Bundles
Complete Contents List of CD 2.3.1

 

Compatibility with non-dSPACE Software

The software included on this dSPACE CD is compatible with the following non-dSPACE software.

Software and Version Requirements for dSPACE Products
Windows 95, Windows 98, or Windows NT 4.0 (Service Pack 3) Required for all dSPACE software
MATLAB Version: 5.3.0.10183 (R11) 5.3.1.29215a (R11.1) Required when using the following dSPACE software: RTI1003, RTI1005, RTI-MP, RTI CAN Blockset, FFTACC Blockset and MLIB/MTRACE
Microsoft Internet Explorer Version 4.0 or higher (Internet Explorer 5.0 is supplied on this CD) Required to access the online documentation
DS1102/DS1003/DS230x Compiler Version 4.7 or 5.11 Required when using the following dSPACE hardware: DS1003, DS230x
DS1005/DS1103/DS1401 (MicroAutoBox) Compiler Version 1.4j* Required when using the following dSPACE hardware: DS1005
DS1004 Compiler Version 1.1* Required when using the following dSPACE hardware: DS1003/DS1004 (AlphaCombo)

*NOTE: These compilers are supplied on this CD and are installed automatically during installation if purchased with the dSPACE system. The DS1102/DS1003/DS230x Compiler is supplied by TI. For information on knownproblems regarding the TI C Compiler please see the CD's ReadMe.txt file.

Board-Specific Software

The following board-specific software is included on this CD. For network-based versions the same version numbers apply.

Software and Version Description
BASE Version 1.7 For use with all dSPACE software and hardware
ControlDesk® Basic 1.2.1 For use with all dSPACE hardware
RTLib1003 Version 3.0.2 RTLib1004 Version 2.3.1 RTLib1005 Version 1.0.2 Real-time libraries for use with the respective dSPACE boards

 

Documentation

The following versions of the respective documentation are valid forthis CD. All documentation listed below is also available online.

NOTE: If there is more than one version listed, butno specific product version is stated, both manual versions can be used with the respective product on this CD. Only the new, larger sized documentation islisted.

Documentation Version
ControlDesk Experiment Guide September 1999 / March 2000
ControlDesk Test Automation Guide September 1999
DS1003/DS1004 Installation and Configuration Guide for Modular and Multiprocessor Systems May 1999 / March 2000
DS1005 Installation and Configuration Guide for Modular and Multiprocessor Systems March 2000
RTI and RTI-MP Implementation Guide March 2000
MLIB/MTRACE Interface and Trace Libraries May 1999 / March 2000

 

CDP Software Bundles

The following Control Development Package (CDP) software bundles are included on this CD. The CDPs contain the ControlDesk Base Instrumentation Kit and ControlDesk Automation Kit, RTI, and MLIB/MTRACE. The CDP1003-MP and CDP1005-MP packages for multiprocessor systems also include RTI-MP in addition to the other CDP packages.

CDP1003 for the DS1003 DSP Board Version Version
ControlDesk Base Instrumentation Kit 1.2.1
ControlDesk Automation Kit 1.2.1
RTI1003 3.5
MLIB/MTRACE 4.1

 

CDP1003-MP for Multi DS1003 DSP boards and the DS1003/DS1004 (AlphaCombo) Version Version
ControlDesk Base Instrumentation Kit 1.2.1
ControlDesk Automation Kit 1.2.1
RTI1003 3.5
RTI-MP 3.5
MLIB/MTRACE 4.1

 

CDP1005 for the DS1005 PPC Board Version Version
ControlDesk Base Instrumentation Kit 1.2.1
ControlDesk Automation Kit 1.2.1
RTI1005 3.5
RTI-MP 3.5
MLIB/MTRACE 4.1

 

CDP1005-MP for Multi DS1005 PPC boards Version
ControlDesk Base Instrumentation Kit 1.2.1*
ControlDesk Automation Kit 1.2.1*
RTI1005 3.5
RTI-MP 3.5
MLIB/MTRACE 4.1*


*NOTE: DS1005-MP is not fully supported by ControlDesk yet. By using ControlDesk's Hardware Navigator (ControlDesk Basic), you can register a multiprocessor system based on DS1005 boards and download applications to it. But all other ControlDesk Kits will treat this MP system as a system with several single independent DS1005 boards. Thus, in contrast to multiprocessorsystems based on DS1003 boards, you cannot load an SDF file as a variable description file for DS1005-MP systems. Instead you have to load separate TRC files foreach processor board. As a result, data capturing is limited to single DS1005 boards as well.

DS1005-MP systems are not fully supported by MLIB/MTRACE yet. In contrast to multiprocessor systems based on DS1003 boards, you cannot switch to multiprocessing mode to simultaneously access all processor boards with one MLIB/MTRACE instance. Instead, you have to create a separate MLIB/MTRACE instance for each processor board.


Please refer to the manual 'MLIB/MTRACE MATLAB-dSPACE Interface Libraries' for further information.