探索全新的 mydSPACE 服务: 许可证管理、全新的 dSPACE 帮助以及用于用户文档的 dSPACE 聊天机器人。请访问我们的专用支持页面,获取更多信息和支持。 链接了解更多并获取支持

FAQ 280: Error message "DAQ/STIM list is inconsistent", RCP

Question

A warning message "The mode configuration of a DAQ/STIM list is inconsistent. (failure checking not supported without service" appears in the “DCI-GSI2 Status > Device Message” section of the DCI Configuration Tool.(*1) Is there any way to resolve this issue?

*1

Solution

In the Access Configuration of the ECU Interface Manager, which is used to create EIC files, disabling the "Data Receive Synchronization"[Fig.1] property may stop the warning message. One possible cause of this warning is that the configured Event Channel does not support the "Double Buffer Mechanism," also known as the failure check mechanism. By disabling the Data Receive Configuration, it implies that the Double Buffer Mechanism will not be used, thereby resolving the configuration mismatch. 

Fig.1 the property of Data Receive Synchronization 

The “Data Receive Synchronization” property reflects the configuration defined in the A2L file. Therefore, if the section of “XCP_Bypassing” in “IF_DATA dSPACE_XCP” definition is set as shown below in the A2L file[Table 1], it will be treated as disabled in the ECU Interface Manager[Fig.2].

Table 1 Section “IF_DATA dSPACE_XCP” is defined in A2L 

  /begin IF_DATA dSPACE_XCP 
    0x00010100           /* AML version  1.1.0 = 0x00010100 */ 

    /begin XCP_Bypassing 
      NOT_SUPPORTED       /* enable double buffer mode */ 
      NOT_SUPPORTED       /* enable ECU wait mechanism */ 
      NOT_SUPPORTED       /* enable failure checking */ 
      NOT_SUPPORTED       /* enable failsafe page */ 
    /end XCP_Bypassing 

  /end IF_DATA 

Fig.2 Disabled Data Receive Synchronization 

Tags

Date 2026-11-02
资料信息 常见问答

通过 dSPACE时事通讯服务了解最新信息。

通过 dSPACE 时事通讯服务,我们将随时向您通报当前的使用案例、新解决方案和产品以及培训和活动。在此注册,免费订阅。

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.