MTest 1.3 / AutomationDesk 1.2.1 Product Release for dSPACE Release 4.2

Introduction

The dSPACE product release MTest 1.3 / AutomationDesk 1.2.1 provides new and improved features for dSPACE Release 4.2. It can be used for:

• Updating an AutomationDesk 1.2 installation to AutomationDesk 1.2.1
• Installing MTest 1.3 including some basic components of AutomationDesk 1.2.1
• Installing MTest 1.3 as an add-on to a complete installation of AutomationDesk and updating to AutomationDesk 1.2.1

New Features

For the new features of MTest 1.3 and AutomationDesk 1.2.1, refer to the New Features and Migration document, that can be downloaded below.

Installation

To use MTest 1.3 / AutomationDesk 1.2.1, you need dSPACE Release 4.2. Additionally, MTest requires MATLAB (for MATLAB releases, see below).
For details about the installation procedure, refer to the Installation Notes document, that can be download below.

For the installation of MTest 1.3 you need a new license code. If you do not have this license code available, please contact your distributor.

If you only want to install AutomationDesk 1.2.1 as a patch for AutomationDesk 1.2, you have to press the Skip button in the dialog where the setup asks you for the keydisk.

Compatibility

The same information as for Release 4.2 applies.

Download

Installation Notes (45.3KB)
New Features and Migration (907KB)
MTest13ADesk121.zip (248MB) (Unzip to your local hard disk and start cdsetup.exe)