FAQ 157: RTICAN - Switching from MicroAutoBox II to MicroAutoBox III
Question
What do I have to consider when using Bus Manager if I have worked with RTICAN before?
When changing from MicroAutoBox II to MicroAutoBox III, a change from RTICAN to Bus Manager takes place at the same time. To make the implementation of a CAN communication in the new working environment easier, the RTICAN demo "RX and TX Messages, Status Block" should be created in Bus Manager. The demo is shown in Figure 1.
Answer
| Date | 2021-11-18 |
| 인포메이션 타입 | FAQ |
| dSPACE Release | 2023-A, 2022-B, 2022-A, 2021-B, 2021-A, 2020-B, 2020-A, 2019-B, 2019-A, 2018-B, 2018-A, 2017-B, 2017-A, 2016-B, 2016-A, 2015-B, 2015-A, 2014-B, 2014-A, 2013-B, 2013-A, Prior to 2013-A |