FAQ 562: How to Use Multiple Versions of dSPACE RCP and HIL Software on the Same PC
Question
I installed a newer version of dSPACE RCP and HIL software on my PC, but the previously installed version stopped working.
Can I install and use multiple versions of dSPACE RCP and HIL software on the same PC?
Solution
One of the installations of each dSPACE software installation is the active installation.
If your system contains more than one installation (from different Releases, for example), you can manually activate a specific installation.
Rules for activation
- The most recently installed version of a software product on your host PC automatically becomes the active installation.
- Every time you manually activate a deactivated installation, the currently active installation is automatically deactivated first.
- Valid for installations of dSPACE Release 2017-B and later:
If you modify, repair, or remove a product set that contains a deactivated installation, the deactivated installation is activated first.
Depending on the version of dSPACE Installation Manager, the following activation methods are available:
- dSPACE Installation Manager 5.3 or later: Both Method 1 and Method 2 are available.
- dSPACE Installation Manager 5.2 or earlier: Method 2 is available.
Method 1: How to Activate All Installations of a Specific dSPACE Release in One Step
- Close all dSPACE programs and MATLAB (if used).
- From
Start – dSPACE Installation Manager, selectdSPACE Installation Manager. The dSPACE Installation Manager opens. - Click the
Installationstab. The Installations page lists all dSPACE installations on your host PC. - Click
Activate Release.
- When prompted, restart your system
Method 2: How to Activate a Single dSPACE Installation Objective
- Close all dSPACE programs and MATLAB (if used).
- From
Start – dSPACE Installation Manager, selectdSPACE Installation Manager. The dSPACE Installation Manager opens. - Click the
Installationstab. The Installations page lists all dSPACE installations on your host PC. - Select the installation you want to activate (for example, dSPACE RCP and HIL 2025-B).
- Click
Activate.
- When prompted, restart your system.
Note
For more details about activation and deactivation, please refer to the following documentation:
Activating and Deactivating dSPACE Installations
Tags
| Date | 2026-10-01 |
| Product | RCP and HIL Software |
| Information Type | Frequently Asked Questions |