- Home
- Support
- Version & Compatibility
- RCP and HIL Software
- Release 7.0
Compatibility with non-dSPACE Software
The software included on this Release is compatible with the following non-dSPACE software.
| Software | Description |
| Windows XP SP3 (32-bit version), Windows Vista SP1, Windows 7 |
Required for all dSPACE software. |
MATLAB R2007b+ |
Required when using the following dSPACE software: RTI and RTI Blocksets, FlexRay Configuration Blockset,, MLIB/MTRACE, and dSPACE Automotive Simulation Models Note: Only 32-bit MATLAB versions are supported. |
| Microsoft Internet Explorer 6 or later | Required to access the online documentation and for ModelDesk |
| Texas Instruments TMS320C3x/C4x C Compiler Version 4.7 or 5.11 | Required for building slave applications for DS2211, DS2210, or DS230x. Note: This compiler is supplied by Texas Instruments. |
| Microtec PowerPC C Compiler Version 3.7 | Required when using the following dSPACE hardware: DS1005, DS1103, DS1104, or DS1401 (MicroAutoBox) RapidPro systems used as prototyping ECU Note: This compiler is supplied on this Release and is installed automatically during installation if purchased with the dSPACE system. |
| dSPACE DS1006 C Compiler 2.1 | Required for building applications for DS1006 Note: This compiler is based on the GNU C Compiler 3.3.5 and is installed automatically during installation of the real-time libraries. |
Board-Specific Software
The following board-specific software is included on this Release.
| Software and Version | Description |
| Device Driver Version 3.0 | For use with all dSPACE software and hardware |
| ConfigurationDesk® Loader Version 3.0.4 | For use with the RapidPro hardware |
| ControlDesk® Basic Version 3.7.1 | For use with all dSPACE hardware except for RapidPro |
| RTLib1005 Version 2.7 RTLib1006 Version 2.3 RTLib1103 Version 3.4.1 RTLib1104 Version 2.0.2 RTLib1401 Version 3.0.3 RTLib1603 Version 1.6.2 |
Real-time libraries for use with the respective dSPACE hardware |
