This application note describes how to perform diagnostic tests using virtual validation.
The PC-based simulation of virtual ECUs (V-ECUs) lets you prepare and run hardware-in-the-loop (HIL) tests early in the development process of ECU software. In addition to the actual application software, ECUs typically provide specific diagnostic features. Generating a V-ECU with these diagnostic features requires additional third-party basic software modules. The integration of these third-party modules is possible using AUTOSAR micro controller abstraction layer (MCAL) modules provided by dSPACE.
The application note describes the workflow for generating such V-ECUs with SystemDesk. It also explains how to use ControlDesk as diagnostic tester to execute diagnostic services and access the fault memory.
The application note uses the EB tresos AutoCore basic software from Elektrobit to implement the diagnostic features and describes how to generate the Elektrobit basic software for the simulation in VEOS.
SystemDesk Version | Download | Revision Date | Revision |
5.0 p1 | AR_Fuelsys_1Ecu_Diagnosis.zip | 2018-08-08 | 1.0 |
Date | 2018-08-17 |
소프트웨어 타입 | Experiment and Visualization Software, System Architecture Software, Bus and Network Software, ECU Interface Software, Simulation Software |
제품군 | ControlDesk, SystemDesk, VEOS |
인포메이션 타입 | 어플리케이션 노트 |
인포메이션 카테고리 | Working with |
dSPACE Release | 2022-A, 2021-B, 2021-A, 2020-B, 2020-A, 2019-B, 2019-A, 2018-B, 2018-A, 2017-B |
혁신을 추진하세요. 항상 기술 개발의 동향을 주시해야 합니다.
저희 전문 지식 서비스에 가입하세요. dSPACE의 성공적인 프로젝트 사례를 확인해 보세요. 시뮬레이션 및 검증에 대한 최신 정보를 받아보세요. 지금 바로 dSPACE 다이렉트(뉴스레터)를 구독하세요.