FAQ 196: VEOS CAN Bus Simulation Error invalid Bus Access Request [] baud rate: 0
Question
When simulating a CAN bus in VEOS, the following error message appears:
"The following CAN bus connector with a flexible rate operation mode has an invalid Bus Access Request [???????\CAN Cluster 1] baud rate: 0." *1
As a result, the simulation cannot be executed.
*1
Solution
In VEOS, open the project and select the Bus Access Request. Then, go to “Properties” -> “Settings” and enter the specified data rate in the "Baud rate" and "Data phase baud rate" fields. After entering the values, save the settings and update the SDF.
Tags
| Date | 2026-11-02 |
| インフォメーション | FAQ |