BMS Testing Reimagined: Compact, Flexible, Safe
- 自動車
- HILテスト
- エレクトロモビリティ
- SILテスト
- パワーHIL
12:35min
概要
The reliable operation of battery management systems (BMS) is essential for electric mobility and energy storage. Traditional hardware-in-the-loop (HIL) systems for BMS testing are often large and hardware-intensive, as they generate real cell voltages for hundreds of cells. This video demonstrates an alternative approach: signal-level HIL with cell supervision virtualization.
Instead of using setups based on real cell voltages, the system simulates the logic of FPGA-based cell supervision circuits (CSC) directly within the HIL. This allows communication, fault responses, cell behavior, and balancing to be fully replicated – without physical batteries. In the demo, we test an e-scooter battery management system, including dynamic load cycles, cell voltages, state monitoring, and fault injection.
The result: compact, cost-effective setups with high accuracy. Developers can test earlier, analyze faults under safe conditions, and significantly increase test coverage. This makes the development of robust BMS systems faster, more flexible, and safer.
ホスト
Ellen Bünte
Project Engineer, Electromobility & Electric Drives, dSPACE
Markus Plöger
Product Manager, Electromobility & Electric Drives, dSPACE
FAQ
Q1: What is signal-level HIL for BMS?
A1: It is a method in which cell voltages are no longer physically output; instead, cell controller functionalities are simulated within the HIL system.
Q2: What are the advantages of cell controller virtualization?
A2: It reduces hardware requirements, lowers costs, and enables flexible, safe testing even in the early stages of development.
Q3: Can I test realistic failure scenarios with this approach?
A3: Yes; for example, communication errors, voltage deviations, or chip anomalies can be simulated without risk.
Q4: Is the solution limited to specific chip manufacturers?
A4: No, it supports various CSC manufacturers such as Analog Devices, NXP, and TI.
Q5: For which applications is this suitable?
A5: For all BMS tests, including those in electric vehicles, e-scooters, and stationary storage solutions.