ConfigurationDesk New Features & Benefits 

• Option to back up projects, including all referenced artifacts 
• Extended support of artifacts for direct referencing (DTFX files, EIC files)
• New features for the shared data interface (SDI) 
  • New error conflict for mismatched parameter configurations
  • Display of the conflict status of SDI signals
• New support of SCALEXIO hardware (DS6603 FPGA Base Board & DS5487I1 Insulation Failure I/O Module)
• Support of multiple device and hardware topologies per ConfigurationDesk application
• New build check for Simulink models with Skip model code generation enabled
• Support of SIC files that provide TRC and A2L fragments
• Providing a new option to specify custom TRC files for real-time applications and BSC file generation

Bus Manager New Features & Benefits

• Enhanced usability of the Bus Configuration Behavior table: New export and import options for bus configuration behavior settings and easier selection of multiple elements
• New J1939 PDU Addresses manipulation feature: Identifies J1939-21 compliant IPDUs that are to be manipulated by their source and destination addresses
• New J1939 PGN Collector feature: Identifies J1939‑21‑compliant IPDUs that are to be inspected by their parameter group number (PGN)
• New J1939 PDU Identifier feature: Enables run-time access to the priority, parameter group number (PGN), source address, and destination address of received J1939‑21‑compliant IPDUs
• Enhanced PDU RX Interrupt feature: Supports the shared data interface (SDI)
• Enhanced Frame Triggering manipulation feature: Provides properties for specifying initial values for the identifier, extended addressing, CAN FD frame support, and bit-rate switch