FAQ 814: Synchronizing I/O on Different SCALEXIO Boards
Question
I would like to transfer an I/O event from one SCALEXIO I/O board to another SCALEXIO I/O board. For example, I would like to synchronize an AD conversion with a multi-channel pulse width modulation (PWM). The PWM generation is processed on a DS6202 Digital I/O Board and a synchronously triggered AD conversion is processed on a DS6121 Multi I/O Board. I do not know how to implement this use case.
I get the following conflict while implementing the aforementioned use case:
“Function block - Invalid trigger function provider assigned (not on the same board)”
How can this conflict be solved?
Solution
Directly transferring an I/O event from one I/O board (or I/O unit in the case of MicroAutoBox III) to another I/O board is not implemented in ConfigurationDesk. A specific combination of ConfigurationDesk function bocks must be included in the ConfigurationDesk signal chain, and external wiring is required to transfer a pulse to the target I/O board.
The main problem is that the channel sets assigned to the function block and the referencing trigger function provider (e.g., the Trigger In function block) are located on different I/O boards/units.
Based on this example, follow the workflow below:
- In a Multi-Channel PWM Out Function block on a DS6202 Digital I/O Board, enable the "I/O function triggering generation" property and its related properties, such as "Trigger condition", etc.
- Add a Digital Pulse Out Function block and assign a DS6202 Digital I/O channel to the function block. Assign the Multi-Channel PWM Out block as a "Function trigger provider" for the Digital Pulse Out Block.
- Add a Trigger In Function block and assign a DS6121 Multi I/O channel.
- Add a Voltage In Function Block and assign a DS6121 Multi I/O channel.
Define a "Trigger Function" as "Trigger Source" and specify the related trigger. - Draw an external connection and connect the related pins of the DS6202 Digital I/O channel (assigned in the Digital Pulse Out Function block) and the DS6121 Multi I/O channel (assigned in the Trigger In Function block).
The Voltage In block is executed synchronously to the Multi-Channel PWM Out block.
In the case of a MicroAutoBox III, the selected method must be applied accordingly with the necessary adjustments.
Tags
| Date | 2026-10-30 |
| Produit | ConfigurationDesk, MicroAutoBox III, SCALEXIO |
| Type d’information | Foire Aux Questions (FAQ) |
| Catégorie d’information | Travailler avec |