Découvrez les nouveaux services mydSPACE : Gestion des licences, la nouvelle aide dSPACE et le chatbot dSPACE dédié à la documentation utilisateur. Vous trouverez davantage d'informations et d'aide sur notre page d'assistance dédiée. Lien En savoir plus et obtenir de l'aide

FAQ 810: How Do I Disable ACK Responses in CAN Communication?

Question

Is there a function in Bus Manager that can control whether an ACK is transmitted when a CAN node receives a message?

Solution

No, Bus Manager does not provide a dedicated setting to directly control ACK transmission. However, ACK responses can be suppressed by enabling Low-power mode > Silent mode in the CAN Function Block properties in ConfigurationDesk.

In this mode, the CAN node remains active but it operates in a listen-only state on the bus. As a result, it does not transmit CAN frames and does not send ACK responses. 

When enabled, the Mode input port becomes available. Set the Mode input to 2 (Silent mode) from your Simulink model or a TRC variable to place the CAN node into listen-only operation. 

However, please note that some channel types (I/O board types) are not supported. Refer to the table below for details. 

SCALEXIO
Channel Type 
Bus 1 
CAN 1
CAN 2
CAN 8
Hardware 
DS2671  DS2672  DS6301 
DS6341 
DS6342 
DS6302 
DS6344 
DS6345 
Low-power mode 
Not Supported  Not Supported  Supported  Supported 

 

MicroAutoBox 3 
Channel Type 
CAN 4
CAN 5
CAN 6
Hardware 
DS1513  DS1514(DS4342)  DS1521 
Low-power mode 
Supported  Supported  Supported 

 

MicroLabBox 2 
Channel Type 
CAN 9
Hardware 
DS1513 
Low-power mode 
Supported 

 

For more details, refer to the "Using low-power mode" section of the following online documentation. (Online document for dSPACE RLS2026-A. For accurate information, refer to the documentation for the release you are using.) 

Configuring the Basic Functionality (CAN) - User Documentation - dSPACE 

Tags

Date 2026-11-05
Type d’information Foire Aux Questions (FAQ)

Restez informé grâce à notre service de newsletter dSPACE direct.

Grâce à notre service de newsletter dSPACE, nous vous tiendrons informé des cas d'utilisation actuels, des nouvelles solutions et des nouveaux produits, ainsi que des formations et des événements. Inscrivez-vous ici pour un abonnement gratuit.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.