Découvrez les nouveaux services mydSPACE : Gestion des licences, la nouvelle aide dSPACE et le chatbot dSPACE dédié à la documentation utilisateur. Vous trouverez davantage d'informations et d'aide sur notre page d'assistance dédiée. Lien En savoir plus et obtenir de l'aide

FAQ 598: Simulating SIMULIA Simpack Models on SCALEXIO

Question

I would like to simulate models created with the SIMULIA Simpack multibody simulation tool from Dassault Systèmes in real time on SCALEXIO. Is this supported?

Solution

Yes, this is supported with Simpack Realtime.

General overview

The key is Simpack’s ability to export the model as an FMU for co-simulation with a real-time solver. This step must be performed with Simpack running on Linux, either via the GUI or command line. Before exporting the model, define the inputs, outputs, and parameters that need to be tunable.

The SCALEXIO system is configured once with some custom configuration properties to access the Dassault license server and tune the RTOS scheduling to meet the requirements of the Simpack FMU. This is done with the web interface of the SCALEXIO system.

The Simpack model FMU is then imported into ConfigurationDesk. 

The SCALEXIO RTOS is Linux-based and tuned for hard real-time constraints with high performance. To avoid imposing compatibility constraints, it does not provide all the libraries available on a typical Linux desktop system. Therefore, a second FMU containing the required libraries must be added to the same application process to resolve the dependencies of Simpack Realtime. Simpack support can assist in packaging the right set of libraries for your version of Simpack.

Because FMUs exported from Simpack models typically require several cores for real-time execution, the number of cores assigned to the FMU is configured in ConfigurationDesk for the respective application process, using the Number of required processor cores parameter. A default value for this parameter can be specified during FMU export. The CFD_I_MC license is needed. Using a SCALEXIO HPP P03 (or later) or a HPP P02 with firmware version 26.1.4 or later is recommended. The HCP P04 allows computation of Simpack FMUs requiring a maximum of 4 cores. The DS6001 is not supported.

The subsequent workflow in ConfigurationDesk for connecting the Simpack model FMU to electrical I/O and other FMU or Simulink models follows the standard workflow, as does the build process for generating the real-time application.

Conclusion

Once the general, one-time system configuration steps are done, it is easy and straightforward to implement Simpack models as SCALEXIO real-time simulations with ConfigurationDesk. 

dSPACE product management for ConfigurationDesk is happy to give you a first overview and a practical impression of the workflow. If you are interested, contact support@dspace.de. 

A couple of Simpack-specific settings and details must be considered properly, some of which might depend on your version of SIMULIA Simpack. Therefore, SIMULIA Simpack support is available to discuss your usage scenario, provide deeper insight, and help ensure your success. Contact SIMULIA at https://www.3ds.com/support or via your usual representative.

Tags

Date 2026-11-12
Produit ConfigurationDesk, SCALEXIO
Type d’information Foire Aux Questions (FAQ)

Restez informé grâce à notre service de newsletter dSPACE direct.

Grâce à notre service de newsletter dSPACE, nous vous tiendrons informé des cas d'utilisation actuels, des nouvelles solutions et des nouveaux produits, ainsi que des formations et des événements. Inscrivez-vous ici pour un abonnement gratuit.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.