Découvrez les nouveaux services mydSPACE : Gestion des licences, la nouvelle aide dSPACE et le chatbot dSPACE dédié à la documentation utilisateur. Vous trouverez davantage d'informations et d'aide sur notre page d'assistance dédiée. Lien En savoir plus et obtenir de l'aide

FAQ 562: How to Use Multiple Versions of dSPACE RCP and HIL Software on the Same PC

Question

I installed a newer version of dSPACE RCP and HIL software on my PC, but the previously installed version stopped working. 
Can I install and use multiple versions of dSPACE RCP and HIL software on the same PC?

Solution

One of the installations of each dSPACE software installation is the active installation.
If your system contains more than one installation (from different Releases, for example), you can manually activate a specific installation.

 

Rules for activation

  • The most recently installed version of a software product on your host PC automatically becomes the active installation.
  • Every time you manually activate a deactivated installation, the currently active installation is automatically deactivated first.
  • Valid for installations of dSPACE Release 2017-B and later:
    If you modify, repair, or remove a product set that contains a deactivated installation, the deactivated installation is activated first.

 

Depending on the version of dSPACE Installation Manager, the following activation methods are available:

  • dSPACE Installation Manager 5.3 or later: Both Method 1 and Method 2 are available.
  • dSPACE Installation Manager 5.2 or earlier: Method 2 is available.

 

 

 

Method 1: How to Activate All Installations of a Specific dSPACE Release in One Step

  1. Close all dSPACE programs and MATLAB (if used).
  2. From Start – dSPACE Installation Manager, select dSPACE Installation Manager. The dSPACE Installation Manager opens.
  3. Click the Installations tab. The Installations page lists all dSPACE installations on your host PC.
  4. Click Activate Release.
  1. Select the Release you want to activate (for example, dSPACE Release 2025-B) and click OK.
  1. Confirm the following dialog:

(Activation can take some time.)

  1. When prompted, restart your system

Method 2: How to Activate a Single dSPACE Installation Objective

  1. Close all dSPACE programs and MATLAB (if used).
  2. From Start – dSPACE Installation Manager, select dSPACE Installation Manager. The dSPACE Installation Manager opens.
  3. Click the Installations tab. The Installations page lists all dSPACE installations on your host PC.
  4. Select the installation you want to activate (for example, dSPACE RCP and HIL 2025-B).
  5. Click Activate.

(Activation can take some time.)

  1. When prompted, restart your system.

Note

For more details about activation and deactivation, please refer to the following documentation:
Activating and Deactivating dSPACE Installations

 

Sujets apparentés

  • FAQ 266
    FAQ 266

    An additional MATLAB version was installed on a computer with an existing dSPACE Release installation. How can I connect the new MATLAB installation to the dSPACE software?

Tags

Date 2026-10-01
Produit Matériels de prototypage rapide et HIL
Type d’information Foire Aux Questions (FAQ)

Restez informé grâce à notre service de newsletter dSPACE direct.

Grâce à notre service de newsletter dSPACE, nous vous tiendrons informé des cas d'utilisation actuels, des nouvelles solutions et des nouveaux produits, ainsi que des formations et des événements. Inscrivez-vous ici pour un abonnement gratuit.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.