MATLAB^® R2006x and R2007x Compatibility

RCP and HIL software

RCP and HIL software	MATLAB R2006a (32-bit only)	MATLAB R2006a+ (32-bit only)	MATLAB R2006b (32-bit only)	MATLAB R2007a+ (32-bit only)	MATLAB R2007b (32-bit only)	MATLAB R2007b+ (32-bit only)
Release 7.1	-	-	-	-	-	Yes
Release 7.0	-	-	-	-	-	Yes
Release 6.6	-	-	-	-	-	Yes
Release 6.5	-	-	Yes	Yes	-	Yes
Release 6.4	-	-	Yes	Yes	-	Yes
Release 6.3	-	Yes	Yes	Yes	-	Yes
Release 6.2	-	Yes	Yes	Yes	-	Yes
Release 6.1	-	Yes	Yes	Yes	Yes	-
Release 6.0	-	Yes	Yes	Yes	Yes	-
Release 5.4	-	Yes 1)	Yes 1)	Yes 1)	-	-
Release 5.3	-	Yes 1)	Yes 1)	-	-	-
Release 5.2	-	Yes 1)	Yes 1)	-	-	-
Release 5.1	Yes 1)	Yes 1)	-	-	-	-

 

TargetLink

TargetLink Version	MATLAB R2006a (32-bit only)	MATLAB R2006a+ (32-bit only)	MATLAB R2006b (32-bit only)	MATLAB R2007a+ (32-bit only)	MATLAB R2007b (32-bit only)	MATLAB R2007b+ (32-bit only)
TargetLink 3.2	-	-	-	-	-	Yes
TargetLink 3.1	-	-	-	-	-	Yes
TargetLink 3.0	-	Yes	Yes	Yes	-	Yes
TargetLink 2.3	-	Yes	Yes	Yes	Yes	-
TargetLink 2.2.1	-	Yes	Yes	Yes	-	-
TargetLink 2.2	-	Yes	Yes	-	-	-
TargetLink 2.1.6	Yes	Yes	-	-	-	-

 

1) The RTI FlexRay Blockset does not support MATLAB Releases since R2006a anymore.
Support for R2006a and newer is provided by the FlexRay Configuration Package that was introduced with dSPACE Release 5.2.

Compatibility with MATLAB "plus" (+) releases

If we state compatibility with a MATLAB "plus" (+) release, the corresponding major release (without +) was not tested for compatibility.

Normally no compatibility problems are known, however. The dSPACE setup programs will not prevent the installation.
Please note that you would use such a combination on your own risk. We reserve the right to refuse support in these cases.

Visit the following page on the MathWorks® website for general information about "plus" (+) releases:
http://www.mathworks.de/support/solutions/en/data/1-4GZDU1/index.html?product=ML&solution=1-4GZDU1