TargetLink 3.0

Compatibility with non-dSPACESoftware

TargetLink is compatible with the following non-dSPACE software.

Software and Version

Requirements for TargetLink

Windows 2000 (Service Pack 4)
Windows XP (32-bit version with Service Pack 2)
Windows Vista (32-bit version)

Basic requirement for TargetLink

MATLAB 2008a (Simulink 7.1 Stateflow 7.1)
MATLAB 2007b+ (Simulink 7.0.1 Stateflow 7.0.1)
MATLAB 2007a+ (Simulink 6.6 Stateflow 6.6)
MATLAB 2006b (Simulink 6.5 Stateflow 6.5)
MATLAB 2006a+ (Simulink 6.4.1 Stateflow 6.4.1)

Basic requirement for TargetLink

Microsoft Internet Explorer Version 5.5 or higher (Internet Explorer 6.0 is supplied on the CD)

Required to access the automatically generated documentation and for online documentation.

Microsoft Visual C/C++ Ver. 6.0, 7.1, or Ver. 8.0
LCC compiler as shipped with MATLAB 2006x, or 2007x

Required when using host simulation

 

Compatibility with Target Compilers

TargetLink is compatible with the following compilers.

Compilers and VersionsDescription
Renesas SH Series C Compiler Ver. 6.0, 7.0, 8.0, 9.0 or 9.1Target simulation and target optimization for Renesas SuperH SH-2 processors
Altium C166/ST10 C/C++ Compiler Package Ver. 6.0, 7.5, 8.0, 8.5 or 8.6Target simulation and target optimization for Infineon C16x processors
Altium TriCore C/C++ Compiler Package Ver. 1.1, 1.3, 1.4, 1.5, 2.2, 2.3, 2.5 or GNU C Compiler Ver. 3.3* or 3.4*Target simulation and target optimization for Infineon TriCore processors
Gaio C Compiler Ver. 9 and Ver. 10* , or Renesas Compiler CC32R Ver. 2.0*, 4.3* or 5.0*Target simulation and target optimization for Renesas M32R processors
Cosmic C Cross-Compiler** for HCS12 or S12X Ver. 4.4, 4.5, 4.6, 4.7 or Metrowerks CodeWarrior for HCS12 Ver. 1.2*, 2.0* or 3.1 or Metrowerks CodeWarrior for S12X Ver. 4.1, 4.5 or 4.6Target simulation and target optimization for Freescale HCS12 or S12X processors***
Wind River PowerPC Family C-Compiler Suite Ver. 4.3*, 4.4, 5.0, 5.2, 5.3, 5.5 or Green Hills Optimizing C Compiler for PowerPC Ver. 3.0*, 3.5*, 3.6, 4.0, 4.2, 5.0 or Metrowerks CodeWarrior Ver. 6.0*, 8.1*, 8.5* or 8.7*Target simulation and target optimization for Freescale MPC5xx processors
Altium C166/ST10 C/C++ Compiler Package Ver. 7.5, 8.0, 8.5 or 8.6Target simulation and target optimization for ST Microelectronics ST10F27x processors
Altium C166 VX C/C++ Compiler Package Ver. 2.1Target simulation Infineon XC2200 processors
Renesas H8S, H8/300 Series C/C++ Compiler Ver. 3.0, 6.0 or 6.2Target simulation for Renesas H8S/26xx processor
Wind River PowerPC Family C-Compiler Suite Ver. 5.2*, 5.3, 5.5, Green Hills Optimizing C Compiler for PowerPC Ver. 4.0*, 4.2*, 5.0*, GNU C Compiler Ver. 3.4*, Metrowerks CodeWarrior Ver. 1.5*, 2.2* or Microtec C Compiler Ver. 3.2* or 3.3*Target simulation and target optimization for Freescale MPC55xx processors
Green Hills Optimizing C Compiler for NEC V800 Family Ver. 3.5, 4.0, 4.2 or NEC C Compiler Ver. 2.5, 2.7, 3.1Target simulation for NEC V850ES processors
Texas Instruments Code Composer Studio Ver. 1.31, 2.10 or 2.21Target simulation for Texas Instruments TMS470 processors
Metrowerks CodeWarrior for 56800E Ver. 8.1*Target simulation for Freescale MC56F83xx processors


*NOTE: Not used for Target Optimization Modules.
**NOTE: Ver. 4.4 and 4.5 only for HCS12
***NOTE: Target Optimization Modules not for Freescale S12X

Compatibility with Evaluation Boards

The following evaluation boards (EVBs) are supported by TargetLink. Some of them need to be modified (loader, external RAM, etc.). Please order through dSPACE to ensure correct board set-up.

EVBDescription
Renesas EVB2633F Evaluation BoardTarget simulation for Renesas H8S processors
Renesas EVB7055F, EVB7058 or SDK72513 Evaluation BoardTarget simulation for Renesas SuperH SH-2 processors
i+ME Promotion Package 166Target simulation for Infineon C16x processors
Infineon TBTC1766, TBTC1775 or TBTC1796Target simulation for Infineon TriCore 1-1.2 or TriCore 1-1.3 processors
Renesas MSA2114 or M3A-2154 Evaluation BoardTarget simulation for Renesas M32R processors
MCT HCS12 or HCS12DP512 T-BoardTarget simulation for Freescale HCS12 processors
MCT S12X T-Board or T-Board USBTarget simulation for Freescale S12X processors
Axiom CMD-0565 or CME-0555Target simulation for Freescale MPC5xx processors
Axiom MPC5554DEMOTarget simulation for Freescale MPC55xx processors
NEC F_Line-Drive It! or F_Line-Can It!Target simulation for NEC V850ES processors
FS Forth-Systeme STart276 Evaluation KitTarget simulation for ST Microelectronics ST10F27x processors
Texas Instruments EVB470R1Target simulation for Texas Instruments TMS470 processors
dSPACE RapidPro Control Unit with MPC5554Target simulation for Freescale MPC55xx processors
Freescale MC56F8367EVMTarget simulation for Freescale MC56F83xx processors
Infineon SK-EB XC2287Target simulation for Infineon XC2200 processors

 

Compatibility with Real-Time Operating Systems

As an option, TargetLink generates code that runs with OSEK/VDX real-time operating systems, which are compliant with the following binding specification.

OSEK Binding SpecificationOSEK OS, COM and OIL Versions
SB 3OSEK OS 2.1r1, OSEK COM 2.2.2, OSEK OIL 2.2
SB 4OSEK OS 2.2, OSEK COM 2.2.2, OSEK OIL 2.3

 

TargetLink supports vendor specific properties of the following OSEK/VDX real-time operating systems.

  • 3Soft ProOSEK
  • LiveDevices RTA
  • Metrowerks OSEKturbo
  • Vector Informatik osCAN
  • WindRiver OSEKWorks

Tags
Date 2009-11-15
Software-Typ Software für Seriencode-Generierung
Themenschwerpunkt OSEK
Produkt TargetLink
Informationstyp Referenzinformationen
Informationskategorie Versionen und Kompatibilität
dSPACE Release Bis 2013-A

Treiben Sie Innovationen voran. Immer am Puls der Technologieentwicklung.

Abonnieren Sie unser Expertenwissen. Lernen Sie von erfolgreichen Projektbeispielen. Bleiben Sie auf dem neuesten Stand der Simulation und Validierung. Jetzt dSPACE direct und dSPACE direct aeropace & defense abonnieren.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.