Discover the new mydSPACE services: License Management, the new dSPACE Help, and dSPACE Chatbot for User Documentation. Find more information and support on our dedicated support page. Learn more & get support

FAQ 810: How Do I Disable ACK Responses in CAN Communication?

Question

Is there a function in Bus Manager that can control whether an ACK is transmitted when a CAN node receives a message?

Solution

No, Bus Manager does not provide a dedicated setting to directly control ACK transmission. However, ACK responses can be suppressed by enabling Low-power mode > Silent mode in the CAN Function Block properties in ConfigurationDesk.

In this mode, the CAN node remains active but it operates in a listen-only state on the bus. As a result, it does not transmit CAN frames and does not send ACK responses. 

When enabled, the Mode input port becomes available. Set the Mode input to 2 (Silent mode) from your Simulink model or a TRC variable to place the CAN node into listen-only operation. 

However, please note that some channel types (I/O board types) are not supported. Refer to the table below for details. 

SCALEXIO
Channel Type 
Bus 1 
CAN 1
CAN 2
CAN 8
Hardware 
DS2671  DS2672  DS6301 
DS6341 
DS6342 
DS6302 
DS6344 
DS6345 
Low-power mode 
Not Supported  Not Supported  Supported  Supported 

 

MicroAutoBox 3 
Channel Type 
CAN 4
CAN 5
CAN 6
Hardware 
DS1513  DS1514(DS4342)  DS1521 
Low-power mode 
Supported  Supported  Supported 

 

MicroLabBox 2 
Channel Type 
CAN 9
Hardware 
DS1513 
Low-power mode 
Supported 

 

For more details, refer to the "Using low-power mode" section of the following online documentation. (Online document for dSPACE RLS2026-A. For accurate information, refer to the documentation for the release you are using.) 

Configuring the Basic Functionality (CAN) - User Documentation - dSPACE 

Tags

Date 2026-11-05
Informationstyp FAQ (Häufig gestellte Fragen)

Immer auf dem neuesten Stand mit unserem Newsletter-Service.

Mit unserem Newsletter-Service informieren wir Sie über aktuelle Anwendungsbeispiele, neue Lösungen und Produkte sowie über Schulungen und Veranstaltungen. Hier geht's zur Anmeldung.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.