Discover the new mydSPACE services: License Management, the new dSPACE Help, and dSPACE Chatbot for User Documentation. Find more information and support on our dedicated support page. Learn more & get support

FAQ 786: How to Measure and Record Data in ControlDesk Using Downsampling (Instead of HostService)​

Question

I have a simple Simulink model built and run on a DS1401 target. 
I would like to select a raster for recording in ControlDesk 6.3, but I can only select "HostService" which is the sampling time specified in the model.
Is it possible to set and select a different raster in ControlDesk or at build time?
Specifically, I would like to record a raster that is specified as 1ms, but then thinned out to 10ms, 100ms, and so on.

Solution

As a method for performing measurement and recording at integer multiples of the basic sample time, ControlDesk provides the “Down Sampling function”.

Please follow the procedure below.

Setting up downsampling (measurement thinning):

  1. Open a project in ControlDesk.
  2. Right-Click "Measurement Configuration" > "Acquisition" > "Platform" > "HostService". Then select “Properties”.
  1. Downsampling is displayed in “Properties”. (Default setting=1)
    In the default setting, measurement and recording are performed at the basic sample time.
  1. Enter an integer value in the Downsampling field.
    (If the basic sample time is 1 ms, enter 10 for 10 ms, 100 for 100 ms, etc.)
    *Downsampling settings are also applied during recording.

Tags

Date 2026-11-02
Informationstyp FAQ (Häufig gestellte Fragen)

Immer auf dem neuesten Stand mit unserem Newsletter-Service.

Mit unserem Newsletter-Service informieren wir Sie über aktuelle Anwendungsbeispiele, neue Lösungen und Produkte sowie über Schulungen und Veranstaltungen. Hier geht's zur Anmeldung.

Formularaufruf freigeben

An dieser Stelle ist ein Eingabeformular von Click Dimensions eingebunden. Dieses ermöglicht es uns Ihr Newsletter-Abonnement zu verarbeiten. Aktuell ist das Formular ausgeblendet aufgrund Ihrer Privatsphäre-Einstellung für unsere Website.

Externes Eingabeformular

Mit dem Aktivieren des Eingabeformulars erklären Sie sich damit einverstanden, dass personenbezogene Daten an Click Dimensions innerhalb der EU, in den USA, Kanada oder Australien übermittelt werden. Mehr dazu in unserer Datenschutzbestimmung.